Table of Contents
Advertisement
Initial Setup Wizard
Initial Setup Wizard
You can check the connection and configure the basic router settings on the Initial Setup Wizard page. From
the Run Setup Wizard page, you can follow the instructions that guide you through the process for configuring
the device.
Step 1
Click System Configuration > Initial Setup Wizard.
Step 2
Click Next to go to Check Connection page. If your router has detected a connection, the connection details are displayed
on this page.
Step 3
Select Interface from the drop-down list.
Step 4
Click Next.
Step 5
Under Configure Router Select Connection Type, select your internet connection type.
Step 6
If you select Dynamic IP or DHCP, click Next.
Step 7
If you select Static IP Address, click Next and configure the settings below.
Static IP Address
Subnet Mask
Gateway IP
DNS
Step 8
If you select PPPoE, click Next and configure the settings below.
Account Name
Password
Confirm Password
Step 9
If you select PPTP or L2TP, click Next and configure the settings below.
Account Name
Password
Confirm Password
Static IP Address
Subnet Mask
Gateway IP
Remote Server
DNS
RV345/345P Administration Guide
24
Enter the static IP address.
Enter the subnet mask.
Enter the gateway IP.
Enter the IP address of the DNS.
Enter the account name.
Enter the password.
Confirm the password.
Enter the account name.
Enter the password.
Confirm the password.
Enter the static IP address.
Enter the subnet mask.
Enter the gateway IP.
Enter the remote server.
Enter the IP address of the DNS.
System Configuration
- Quick Links:
- Getting Started
- Wan Settings
Hide quick links:
Advertisement
Table of Contents
