Cisco 1941W Configuration Manual page 98
Cisco 3900 series, cisco 2900 series,
cisco 1900 series
Hide thumbs
Also See for 1941W:
- Hardware installation manual (102 pages) ,
- Installing and upgrading (24 pages)
Table of Contents
Advertisement
Support for Switch Virtual Interfaces (SVI) on ISR G2 Metro Ethernet BD
Command
Step 11
history interval intervals-stored
Example:
Router(config-sla-y1731-delay)#
history interval 2
Step 12
max-delay milliseconds
Example:
Router(config-sla-y1731-delay)#
max-delay 5000
Step 13
owner owner-id
Example:
Router(config-sla-y1731-delay)# owner
admin
Step 14
end
Example:
Router(config-sla-y1731-delay)# end
What to Do Next
To add proactive threshold conditions and reactive triggering for generating traps, see the
Proactive Threshold
When you are finished configuring proactive threshold monitoring for this operation, see the
"Scheduling IP SLAs
Support for Switch Virtual Interfaces (SVI) on ISR G2 Metro
Ethernet BD
You can connect a SVI with a Metro Ethernet BD to re-direct the traffic from a switch port onto the BD
and vice versa, as shown in
Cisco 3900 Series, Cisco 2900 Series, and Cisco 1900 Series Integrated Services Routers Generation 2 Software Configuration Guide
90
Purpose
(Optional) Sets the number of statistics distributions kept
during the lifetime of an IP SLAs Ethernet operation.
(Optional) Sets the amount of time an MEP waits for a
frame.
(Optional) Configures the owner of an IP SLAs operation.
Exits to privileged EXEC mode.
Monitoring" module of the IP SLAs Configuration Guide.
Operations" section to schedule the operation.
Figure
1.
Chapter
Configuring Ethernet Virtual Connection Bridge Domain
"Configuring
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
