hit counter script
Cisco 1900 series Hardware Installation
  1. Manuals
  2. Brands
  3. Cisco Manuals
  4. Network Router
  5. Catalyst 1900 Series
  6. Hardware installation

Cisco 1900 series Hardware Installation

Hide thumbs Also See for 1900 series:
Table of Contents

Advertisement

Quick Links

See also: Manual
Enlarged version
Cisco 1900 Series Integrated Services
Router Hardware Installation
Americas Headquarters
Cisco Systems, Inc.
170 West Tasman Drive
San Jose, CA 95134-1706
USA
http://www.cisco.com
Tel: 408 526-4000
800 553-NETS (6387)
Fax: 408 527-0883
Text Part Number: OL-19084-02

Advertisement

Table of Contents
loading

Related Manuals for Cisco 1900 series

Summary of Contents for Cisco 1900 series

  • Page 1 Cisco 1900 Series Integrated Services Router Hardware Installation Americas Headquarters Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA 95134-1706 http://www.cisco.com Tel: 408 526-4000 800 553-NETS (6387) Fax: 408 527-0883 Text Part Number: OL-19084-02...
  • Page 2 Modifications to this product not authorized by Cisco could void the FCC approval and negate your authority to operate the product. The Cisco implementation of TCP header compression is an adaptation of a program developed by the University of California, Berkeley (UCB) as part of UCB’s public domain version of the UNIX operating system.

  • Page 3: Table Of Contents

    Specifications 1-14 Regulatory Compliance 1-18 Preparing for Router Installation C H A P T E R Safety Recommendations Safety with Electricity Preventing Electrostatic Discharge Damage General Site Requirements Power Supply Considerations Site Environment Cisco 1900 Series Hardware Installation -iii OL-19084-02...
  • Page 4 2-11 Site Log 2-13 Required Tools and Equipment for Installation and Maintenance 2-13 Cable Information and Specifications for Cisco 1900 Series Routers C H A P T E R Console and Auxiliary Port Considerations Console Port Connections EIA/TIA-232 Port USB Serial Console...
  • Page 5 Installing the Cisco Microsoft Windows Vista USB Driver 4-19 Uninstalling the Cisco USB Driver 4-20 Uninstalling the Cisco Microsoft Windows XP and 2000 USB Driver 4-20 Uninstalling the Cisco Microsoft Windows Vista USB Driver 4-20 Connecting to the Auxiliary Port...
  • Page 6 Installing the Cisco Microsoft Windows 2000 USB Driver Installing the Cisco Microsoft Windows Vista USB Driver Uninstalling the Cisco USB Driver Uninstalling the Cisco Microsoft Windows XP and 2000 USB Driver Uninstalling the Cisco Microsoft Windows Vista USB Driver Connecting to the Auxiliary Port...
  • Page 7 Objectives This guide provides an overview and explains how to install, connect, and perform initial configuration for the Cisco 1900 series Integrated Services Routers (ISRs). Some information may not apply to your particular router model. For warranty, service, and support information, see the “Cisco Warranty Terms” section in the Readme First for the Cisco 1900 Series Integrated Services Routers document that was shipped with your router.

  • Page 8: Preface

    Preface Organization This guide includes the following sections: Section Title Description Overview of Cisco 1900 Series Routers Describes the features and specifications of the router. Preparing for Router Installation Describes the site requirements and equipment needed to install the router.
  • Page 9 Tämä varoitusmerkki merkitsee vaaraa. Tilanne voi aiheuttaa ruumiillisia vammoja. Ennen kuin käsittelet laitteistoa, huomioi sähköpiirien käsittelemiseen liittyvät riskit ja tutustu onnettomuuksien yleisiin ehkäisytapoihin. Turvallisuusvaroitusten käännökset löytyvät laitteen mukana toimitettujen käännettyjen turvallisuusvaroitusten joukosta varoitusten lopussa näkyvien lausuntonumeroiden avulla. SÄILYTÄ NÄMÄ OHJEET Cisco 1900 Series Hardware Installation OL-19084-02...
  • Page 10 Utilize o número da instrução fornecido ao final de cada aviso para localizar sua tradução nos avisos de segurança traduzidos que acompanham este dispositivo. GUARDE ESTAS INSTRUÇÕES Cisco 1900 Series Hardware Installation OL-19084-02...
  • Page 11 Använd det nummer som finns i slutet av varje varning för att hitta dess översättning i de översatta säkerhetsvarningar som medföljer denna anordning. SPARA DESSA ANVISNINGAR Cisco 1900 Series Hardware Installation OL-19084-02...
  • Page 12 Brug erklæringsnummeret efter hver advarsel for at finde oversættelsen i de oversatte advarsler, der fulgte med denne enhed. GEM DISSE ANVISNINGER Cisco 1900 Series Hardware Installation OL-19084-02...
  • Page 13 Preface Cisco 1900 Series Hardware Installation xiii OL-19084-02...
  • Page 14 Appliance and Material Safety Law prohibits the use of UL-certified cables (that have the “UL” shown on the code) for any other electrical devices than products designated by CISCO. The use of cables that are certified by Electrical Appliance and Material Safety Law (that have “PSE” shown on the code) is not limited to CISCO-designated products.

  • Page 15: Related Documentation

    Statement 1038 Related Documentation The Cisco IOS software that runs your Cisco 1940 series router includes extensive features and functionality. For information that is beyond the scope of this document, or for additional information, use the following resources.

  • Page 16: Searching For Cisco Documents

    Obtaining Documentation and Submitting a Service Request For information on obtaining documentation, submitting a service request, and gathering additional information, see the monthly What’s New in Cisco Product Documentation, which also lists all new and revised Cisco technical documentation, at: http://www.cisco.com/en/US/docs/general/whatsnew/whatsnew.html...

  • Page 17: Chapter 1 Overview Of The Router

    Universal serial bus (USB) ports are available for USB devices, and a USB mini Type-B serial console port is available in addition to the RJ-45 console connector. This chapter provides an overview of the Cisco 1900 series routers and includes the following sections: Safety Warnings, page 1-1 •...

  • Page 18: Safety Warnings For Finland, Norway And Sweden

    Statement 1017 Chassis Views This section contains views of the front and rear panels of Cisco 1900 series routers, showing the locations of the power and signal interfaces, the interface card slots, and the status indicators. Figure 1-1 shows the front panel of the Cisco 1905 and Cisco 1921 router.
  • Page 19 Front Panel of the Cisco 1905, and Cisco 1921 Router 1.Power over Ethernet (PoE) is available with optional external PoE power supply. 2. Power off the PoE before installing an EHWIC in the Cisco 1905 and Cisco 1921 ISRs. Caution Power off the PoE before installing an EHWIC in the Cisco 1905 and Cisco 1921 ISRs.
  • Page 20 Module Support on Cisco’s Integrated Services Routers Generation 2 http://cisco.com/en/US/prod/collateral/routers/ps10538/aag_c07_563807.pdf for supported modules. 6. Power off the PoE before installing an EHWIC in the Cisco 1905 and Cisco 1921 ISRs. Figure 1-3 shows the front panel of a Cisco 1941 wireless router with antennas mounted.
  • Page 21 Overview of the Router Chassis Views WLAN 2.4 or 5 GHz Figure 1-5 shows the Cisco 1941 and 1941W back panel with ports and LEDs. Figure 1-5 Back Panel of the Cisco 1941 and Cisco 1941W Router eHWIC 1 eHWIC 0...

  • Page 22: Hardware Features

    Cisco 1905 and Cisco 1921 series routers is located on the bottom of the chassis. (See Figure 1-8.) The serial number label for the Cisco 1940 series routers is located on the rear of the chassis on a pull-out tab. (See Figure 1-8.)
  • Page 23 K OP ER AT IO N Product ID (PID) Serial Number (SN) Product ID/Version ID (PID/VID) Common Language Equipment Identifier (CLEI) The serial number for Cisco 1900 series routers is 11 characters long. Note Cisco 1900 Series Hardware Installation OL-19084-02...

  • Page 24: Cisco Product Identification Tool

    CompactFlash memory and enhanced high-speed WAN interface cards (EHWICs) fit into slots on • the Cisco 1940 series chassis, and can be installed or removed without opening the chassis. • A connector inside the Cisco 1940 series chassis accommodates an optional field installable Internal Service Module (ISM).

  • Page 25: Memory

    The Cisco 1905, and Cisco 1921 have an external feed for PoE.(See Figure 1-2.) There are no user-installable or replaceable modules on the Cisco 1905 or Cisco 1921 routers. The • chassis cover should never be removed.

  • Page 26: Router Memory Specifications Table

    RAM represent the minimum usable memory. You can install additional RAM in multiples of the default amount, up to the maximum amount on the Cisco 1940 series ISRs. The Cisco 1905 and Cisco 1921 have factory installed, fixed memory modules and no expansion slots.
  • Page 27 Chapter 1 Overview of the Router Hardware Features Table 1-4 Summary of Cisco 1900 Series LED Indicators (continued) Color Description Location WLAN Green On—Radio is connected, SSID is configured, signal is Front panel 2.4GHz being transmitted, and client is associated, but no data is (Wireless being received or being transmitted.

  • Page 28: Chassis Ventilation

    This allows the system to verify the validity of the certification authority (CA) certificate. The Cisco 1900 series router has a lithium battery. This battery lasts the life of the router under the operating environmental conditions specified for the router, and is not field-replaceable.

  • Page 29: Chassis Security

    Overview of the Router Hardware Features If the lithium battery in a Cisco 1900 ISR should fail, the router must be returned to Cisco for repair. Note Although the battery is not intended to be field-replaceable, the following warning must be heeded: Dispose of used batteries according to the manufacturer’s instructions.

  • Page 30: Baud Reset Button

    Interface Numbering Baud Reset Button The Cisco 1905 and Cisco 1921 ISRs have a baud reset button on the back panel. When the button is pressed during power on, ROMMON resets the router to the default console port configuration. If the baud reset button is pressed for longer than 30 seconds, the router defaults to the read-only ROMMON image.
  • Page 31 Chapter 1 Overview of the Router Specifications Table 1-7 Cisco 1905 and 1921 Series Router Specifications Description Specification Rack-mount 19 in. (48.3 cm) Optional Weight (no modules installed) Approximately 12 lbs Weight with PoE 12.8 lbs Maximum Weight-Fully 14 lbs...
  • Page 32 VCCI V-3 EN 300-386 EN 61000 (Immunity) EN 55024, CISPR 24 EN50082-1 For detailed compliance information, see the Regulatory Compliance and Safety Information for Cisco 1900 Series Routers document. Safety compliance UL 60950-1 CAN/CSA C22.2 No. 60950-1 EN 60950-1 AS/NZS 60950-1...
  • Page 33 9843 ft (3000 m) elevation Operating altitude maximum 10,000 ft (3000 m) Transportation and Storage Environment Nonoperating temperature –40 to 158°F (–40 to 70°C) Nonoperating humidity 5 to 95% RH Nonoperating altitude 15,000 ft (4570 m) Cisco 1900 Series Hardware Installation 1-17 OL-19084-02...

  • Page 34: Regulatory Compliance

    CNS 13438 EN 300-386 EN 61000 (Immunity) EN 55024, CISPR 24 EN50082-1 For detailed compliance information, see the Regulatory Compliance and Safety Information for Cisco 1900 Series Routers document. Safety compliance UL 60950-1 CAN/CSA C22.2 No. 60950-1 EN 60950-1 AS/NZS 60950-1...

  • Page 35: Preparing For Router Installation

    C H A P T E R Preparing for Router Installation This chapter describes the site requirements and equipment needed to install your Cisco 1900 series integrated services router. It includes the following sections: Safety Recommendations, page 2-1 • General Site Requirements, page 2-3 •...

  • Page 36: Safety With Electricity

    Never open the enclosure of the router’s internal power supply. • • If an electrical accident occurs, proceed as follows: – Use caution; do not become a victim yourself. – Turn off power to the device. Cisco 1900 Series Hardware Installation OL-19084-02...

  • Page 37: Preventing Electrostatic Discharge Damage

    Ensure that the site is properly prepared before beginning installation. If you are experiencing shutdowns or unusually high errors with your existing equipment, this section can also help you isolate the cause of failures and prevent future problems. Cisco 1900 Series Hardware Installation OL-19084-02...

  • Page 38: Power Supply Considerations

    Site Environment The Cisco 1900 series router is designed for placement on a desktop, rack-mounted or wall mounted. The location of your router is an extremely important consideration for proper operation. Equipment placed too close together, inadequate ventilation, and inaccessible panels can cause malfunctions and shutdowns, and can also make maintenance difficult.

  • Page 39: Wireless Lan Considerations

    • Cisco Multiband Diversity Omnidirectional Ceiling-Mount Antenna • Network Cabling Specifications The following sections describe the cables needed to install your Cisco 1900 series ISR in the following sections: Console and Auxiliary Port Considerations, page 2-5 • Preparing to Connect to a Network, page 2-7 •...

  • Page 40: Eia/Tia-232 Port

    Connection Procedures for Cisco 1900 Series Routers” document. For operation with Microsoft Windows, the Cisco Windows USB Console Driver must be installed on any PC connected to the Console port. If it is not installed, prompts guide you through a simple installation process.

  • Page 41: Auxiliary Port Connections

    Refer to the following online documents for more information about network connections and interfaces: Cisco Modular Access Router Cable Specifications • Ethernet Connections The IEEE has established Ethernet as standard IEEE 802.3. The Cisco 1941 Ethernet implementations are as follows: 1000BASE-T—1000 Mb/s full-duplex transmission over a Category 5 or better unshielded •...

  • Page 42: Configuring Serial Connections

    The synchronous serial ports available for the router support the following signaling standards: EIA/TIA-232, EIA/TIA-449, V.35, X.21, and EIA-530. You can order a Cisco DB-60 shielded serial transition cable that has the appropriate connector for the standard you specify. The documentation for the device that you want to connect should indicate the standard used for that device.

  • Page 43: Transmission Speeds And Distance Limitations

    BRI WICs are available with either an S/T interface that requires an external Network Termination 1 (NT1), or a U interface that has a built-in NT1. You can install the BRI WICs in any available WIC slots in the chassis. Cisco 1900 Series Hardware Installation OL-19084-02...

  • Page 44: Csu/Dsu Connections

    Distance limitation 32.8 ft (10 m) 32.8 ft (10 m) 1. nF = nanofarad For more information on BRI WICs, refer to Cisco.com. CSU/DSU Connections CSU/DSU WICs are available that provide switched 56-kbps connections, or full or fractionalized T1 connections.

  • Page 45: Installation Checklist

    The sample installation checklist lists items and procedures for installing a new router. Make a copy of this checklist, and mark each item when you complete it. Include a copy of the checklist for each router in your Site Log (described in the “Site Log” section on page 2-13). Cisco 1900 Series Hardware Installation 2-11 OL-19084-02...
  • Page 46 Installation site power check completed Required tools available Additional equipment available Router received Router quick start guide received Cisco Regulatory Compliance and Safety Information Roadmap document received Product registration card received Chassis components verified Initial electrical connections established ASCII terminal (for local configuration) or...

  • Page 47: Site Log

    Cisco Modular Note Access Router Cable Specifications, which is located on Cisco.com. Ethernet hub or PC with a network interface card for connection to Ethernet (LAN) ports • Console terminal (an ASCII terminal or a PC running terminal emulation software) configured for •...
  • Page 48 Chapter 2 Preparing for Router Installation Required Tools and Equipment for Installation and Maintenance NT1 device for ISDN BRI S/T interfaces (if not supplied by your service provider) • Cisco 1900 Series Hardware Installation 2-14 OL-19084-02...

  • Page 49: Chapter 3 Cable Information And Specifications For Cisco 1900 Series Routers

    1900 Series Routers This document gives cable information and specifications for the console port, auxiliary port, and network ports on your Cisco 1900 series integrated services router. It contains the following sections: • Console and Auxiliary Port Considerations, page 3-1 Preparing to Connect to a Network, page 3-3 •...

  • Page 50: Usb Serial Console

    Connection Procedures for Cisco 1900 Series Routers” document. For operation with Microsoft Windows, the Cisco Windows USB Console Driver must be installed on any PC connected to the Console port. If it is not installed, prompts guide you through a simple installation process.

  • Page 51: Auxiliary Port Connections

    Refer to the following online documents for more information about network connections and interfaces: Cisco Modular Access Router Cable Specifications • Ethernet Connections The IEEE has established Ethernet as standard IEEE 802.3. The Cisco 1941 Ethernet implementations are as follows: 1000BASE-T—1000 Mb/s full-duplex transmission over a Category 5 or better unshielded •...

  • Page 52: Configuring Serial Connections

    The synchronous serial ports available for the router support the following signaling standards: EIA/TIA-232, EIA/TIA-449, V.35, X.21, and EIA-530. You can order a Cisco DB-60 shielded serial transition cable that has the appropriate connector for the standard you specify. The documentation for the device that you want to connect should indicate the standard used for that device.

  • Page 53: Transmission Speeds And Distance Limitations

    Chapter 3 Cable Information and Specifications for Cisco 1900 Series Routers Preparing to Connect to a Network Although we do not recommend manufacturing your own serial cables (because of the small size of the pins on the DB-60 serial connector), cable pinouts are provided in the...

  • Page 54: Csu/Dsu Connections

    Chapter 3 Cable Information and Specifications for Cisco 1900 Series Routers Preparing to Connect to a Network The ISDN connection is regarded as a source of voltage that should be inaccessible to user contact. Warning Do not attempt to tamper with or open any public telephone operator (PTO)-provided equipment or connection hardware.

  • Page 55: Installing And Connecting The Router

    C H A P T E R Installing and Connecting the Router This chapter tells how to physically set up Cisco 1900 series integrated services routers. It contains the following sections: Safety Warnings, page 4-2 • Setting Up the Chassis, page 4-3 •...

  • Page 56: C H A P T E R 4 Installing And Connecting The Router

    • If you need to remove or install WICs, VWICs, HWICs, or EHWICs follow the procedures in the Installing Cisco Interface Cards in Cisco Access Routers at the following URL: http://www.cisco.com/en/US/docs/routers/access/interfaces/ic/hardware/installation/guide/inst_ic.html If you need to remove or upgrade the CompactFlash memory card (1940 series only), follow the procedure in “Installing and Upgrading Internal Modules and FRUs in Cisco 1900 Series...

  • Page 57: Setting Up The Chassis

    Setting Up the Chassis The Cisco 1900 series router can be installed on a desktop, and can also be mounted on a wall. Select the setup that best meets the needs of your network. These setups are described in the following sections: Setting the Chassis on a Desktop, page 4-4 •...

  • Page 58: Setting The Chassis On A Desktop

    NE TW OR Setting the Chassis on a Desktop You can place Cisco 1900 series routers on a desktop or shelf. The Cisco 1900 series router is shipped with the rubber feet attached to the chassis to protect the desktop.
  • Page 59 Chapter 4 Installing and Connecting the Router Wall-Mounting the Chassis Figure 4-3 shows the wall-mounting features on the Cisco 1905 and Cisco 1921 routers. Figure 4-3 Wall-Mounting Features on the Cisco 1905 and Cisco 1921 Routers Wall screws 8 inches (20.3 cm)
  • Page 60 Chapter 4 Installing and Connecting the Router Wall-Mounting the Chassis Figure 4-4 shows the wall-mounting features on the Cisco 1941 series routers. Figure 4-4 Wall-Mounting Features on the Cisco 1941 Router Wall screws 5 inches (12.7 cm) Chassis mounting holes (on bottom)

  • Page 61: Rack-Mounting The Chassis

    Failure to stabilize the rack can cause the rack to tip over. Statement 1048 The Cisco 1900 series router can be installed in a 19-inch EIA rack. Mounting brackets allow installing in either a front and rear facing position.
  • Page 62 Chapter 4 Installing and Connecting the Router Rack-Mounting the Chassis Figure 4-6 Bracket Installation for Back Mounting the Cisco 1905 and Cisco 1921 ISRs Ci sc o 19 00 Se rie SY S AC T PO E Cisco 1900 Series Hardware Installation...
  • Page 63 Figure 4-7 shows how to attach the brackets to the sides of the router with the front panel forward. Figure 4-7 Bracket Installation for Front Mounting the Cisco 1940 Series ISR DO NO T RE MO VE NE TW OR...

  • Page 64: Installing The Chassis Ground Connection

    You must connect the chassis to a reliable earth ground, using a ground lug and size 14 AWG (2 mm wire. To install the ground connection for a Cisco 1900 series router, follow these steps: Strip one end of the ground wire to expose approximately 0.75 in. (20 mm) of conductor.
  • Page 65 Chapter 4 Installing and Connecting the Router Installing the Chassis Ground Connection Attach the ring terminal to the chassis. The attachment points for the Cisco 1941 router are shown in Step 3 Figure 4-11. Use a number 2 Phillips screwdriver and the screw supplied with the ground lug. Tighten the screw to a torque of 8 to 10 in-lb.

  • Page 66: Power Connections

    Take care when connecting units to the supply circuit so that wiring is not overloaded. Statement 1018 This section explains how to connect AC or DC power to Cisco 1900 series routers and a console terminal. It covers the following topics: •...

  • Page 67: Connecting Wan And Lan Cables

    Ports and Cabling, page 4-15 • Connection Procedures and Precautions, page 4-16 • You can order additional network connection cables and transceivers from Cisco. For ordering Note information, contact Cisco customer service. For cable pinouts, refer to the Cisco Modular Access Router Cable Specifications document, which is available online.
  • Page 68 RJ-11 (phone) port wires (conductors), the conductors of a cable connected to the RJ-11 port, or the associated circuit-board when the ringer is active. The ringer is activated by an incoming call. Statement 1042 Cisco 1900 Series Hardware Installation 4-14 OL-19084-02...

  • Page 69: Ports And Cabling

    Installing and Connecting the Router Connecting WAN and LAN Cables Ports and Cabling Table 4-1 summarizes some typical WAN and LAN connections for Cisco 1900 series routers. The connections summarized in Table 4-1 are also described in detail in the following documents: Cisco Modular Access Router Cable Specifications •...

  • Page 70: Connection Procedures And Precautions

    The software should be configured with the following parameters: 9600 baud, 8 data bits, no parity, 1 stop bit, and no flow control. Refer to the Cisco 3900 Series, 2900 Series, and 1900 Series Software Configuration Guide for detailed information about using Cisco IOS software for configuring the router.
  • Page 71 PC has a console port that does not accommodate a DB-9 connector, you must provide an appropriate adapter for that port. To communicate with the router, start a terminal emulator application. Step 3 Cisco 1900 Series Hardware Installation 4-17 OL-19084-02...

  • Page 72: Connecting To The Console Port With Mac Os X

    To disconnect the Linux USB console from the Terminal window Enter Ctrl-a followed by : then quit Installing the Cisco Microsoft Windows USB Device Driver The first time a Microsoft Windows based PC is connected to the router, a USB driver must be installed.

  • Page 73: Installing The Cisco Microsoft Windows Xp Usb Driver

    The USB console is ready for use. Installing the Cisco Microsoft Windows 2000 USB Driver This procedure shows how to install the Microsoft Windows 2000 USB driver. Obtain the file cisco_usbconsole.zip from the Cisco.com web site and unzip it. Step 1 Double-click the file setup.exe.

  • Page 74: Uninstalling The Cisco Usb Driver

    The USB console is ready for use. Uninstalling the Cisco USB Driver Uninstalling the Cisco Microsoft Windows XP and 2000 USB Driver This procedure shows how to uninstall both the Microsoft Windows XP and 2000 USB driver. The driver can be removed using the Windows Add Remove Programs utility or the setup.exe program.

  • Page 75: Connecting To The Auxiliary Port

    Disconnect the router console terminal before uninstalling the driver. Note Run the setup.exe program. Click Next. Step 1 The InstallShield Wizard for Cisco Virtual Com appears. Click Next. Step 2 When the Program Maintenance window appears, select the Remove radio button. Click Next. Step 3 When the Remove the Program window appears, click Remove.
  • Page 76 Make sure that your modem and the router auxiliary port are configured for the same transmission speed (up to 115200 bps is supported) and for mode control with data carrier detect (DCD) and data terminal ready (DTR) operations. Cisco 1900 Series Hardware Installation 4-22 OL-19084-02...

  • Page 77: Power Connections

    C H A P T E R Cable Connection Procedures for Cisco 1900 Series Routers This document describes how to connect your Cisco 1941 integrated services router to a power source and to networks and external devices. It includes the following sections: •...

  • Page 78: C H A P T E R 5 Cable Connection Procedures For Cisco 1900 Series Routers

    Ports and Cabling, page 5-2 • Connection Procedures and Precautions, page 5-3 • You can order additional network connection cables and transceivers from Cisco. For ordering Note information, contact Cisco customer service. For cable pinouts, refer to the Cisco Modular Access Router Cable Specifications document, which is available online.

  • Page 79: Connecting To A Console Terminal Or Modem

    8-pin modular RJ-48S interface. RJ-48 straight-through. CSU/DSU 1. The color codes are specific to cables shipped by Cisco 2. NT1 = Network Termination 1 3. PINX = Private integrated network exchange Connection Procedures and Precautions Connect each WAN and LAN cable to the appropriate connector on the chassis or interface card.

  • Page 80: Connecting To The Console Port With Microsoft Windows

    The software should be configured with the following parameters: 9600 baud, 8 data bits, no parity, 1 stop bit, and no flow control. Refer to the Cisco 3900 Series, 2900 Series, and 1900 Series Software Configuration Guide for detailed information about using Cisco IOS software for configuring the router.

  • Page 81: Connecting To The Console Port With Mac Os X

    Chapter 5 Cable Connection Procedures for Cisco 1900 Series Routers Connecting to a Console Terminal or Modem Figure 5-1 Connecting the Console Cable to the Router DO NO T RE MO VE NE TW OR DU RIN G K OP ER...

  • Page 82: Connecting To The Console Port With Linux

    Chapter 5 Cable Connection Procedures for Cisco 1900 Series Routers Connecting to a Console Terminal or Modem Connect the OS X USB port to the router. Step 2 Enter the following commands to find the OS X USB port number...

  • Page 83: Installing The Cisco Microsoft Windows 2000 Usb Driver

    Step 7 Installing the Cisco Microsoft Windows 2000 USB Driver This procedure shows how to install the Microsoft Windows 2000 USB driver. Obtain the file cisco_usbconsole.zip from the Cisco.com web site and unzip it. Step 1 Double-click the file setup.exe.

  • Page 84: Uninstalling The Cisco Microsoft Windows Xp And 2000 Usb Driver

    Step 7 Uninstalling the Cisco USB Driver Uninstalling the Cisco Microsoft Windows XP and 2000 USB Driver This procedure shows how to uninstall both the Microsoft Windows XP and 2000 USB driver. The driver can be removed using the Windows Add Remove Programs utility or the setup.exe program.

  • Page 85: Connecting To The Auxiliary Port

    Chapter 5 Cable Connection Procedures for Cisco 1900 Series Routers Connecting to a Console Terminal or Modem If a User Account Control warning appears, click “Allow - I trust this program...” to proceed. Note When the InstallShield Wizard Completed window appears click Finish.
  • Page 86 Chapter 5 Cable Connection Procedures for Cisco 1900 Series Routers Connecting to a Console Terminal or Modem Cisco 1900 Series Hardware Installation 5-10 OL-19084-01...

  • Page 87: Powering Up The Router

    Powering up the Router, page 6-1 • Performing the Initial Configuration on the Router, page 6-4 • Using the Cisco Setup Command Facility, page 6-4 – Using Cisco Configuration Professional Express, page 6-8 – Using the Cisco CLI—Manual Configuration, page 6-9 –...

  • Page 88: Power Up Procedure

    • Power Up Procedure To power up your Cisco router, follow this procedure to verify the router has performed the initialization and self-test. When the procedure is finished, the router is ready to configure. If you encounter problems while powering on the router, see the routers’ Troubleshooting page on Cisco.com.

  • Page 89: Chapter 6 Configuring The Router

    1-14. Cisco Command Line Interface Cisco Command Line Interface (CLI) lets you configure the initial router settings manually. If you see the following messages, the router has booted and is ready for initial configuration using the CLI. To learn how to use the CLI to configure the router, see the “Using the Cisco CLI—Manual Configuration”...

  • Page 90: Performing The Initial Configuration On The Router

    The facility steps you through a initial configuration, including LAN and WAN interfaces. For more general information about the setup command facility, see the following document: Cisco IOS Configuration Fundamentals Configuration Guide, Release 12.4, Part 2: Cisco IOS User Interfaces:Using AutoInstall and Setup http://www.cisco.com/en/US/docs/ios/fundamentals/configuration/guide/12_4/cf_12_4_book.html...
  • Page 91 Press Ctrl-C, and enter the setup command at the privileged EXEC mode prompt (Router#). For more information on using the setup command facility, see The Setup Command chapter in Cisco IOS Configuration Fundamentals Command Reference, Release 12.2T, http://www.cisco.com/en/US/docs/ios/12_2t/fun/command/reference/122tfr.html...
  • Page 92 GigabitEthernet0/0 unassigned YES NVRAM administratively down down GigabitEthernet0/1 10.10.10.12 YES DHCP GigabitEthernet0/2 unassigned YES NVRAM administratively down down SSLVPN-VIF0 unassigned unset Any interface listed with OK? value "NO" does not have a valid configuration Cisco 1900 Series Hardware Installation OL-19084-02...

  • Page 93: Completing The Configuration

    Completing the Configuration When using the Cisco Setup, and after you have provided all the information requested by the facility, the final configuration appears. To complete your router configuration, follow these steps: The facility prompts you to save the configuration.

  • Page 94: Using Cisco Configuration Professional Express

    Router# configure terminal Router(config)# Using Cisco Configuration Professional Express Use Cisco Configuration Professional Express web-based application to configure the initial router settings. See the Cisco Configuration Professional Express User Guide document on Cisco.com for detailed instructions, http://www.cisco.com/en/US/docs/net_mgmt/cisco_configuration_professional_express/version1_1/on line_help/CCPE11.pdf For help with interface and port numbering, see the “Interface Numbering”...

  • Page 95: Using The Cisco Cli—Manual Configuration

    If the system configuration dialog message does not appear, a default configuration file was installed on the router prior to shipping. See the “Using Cisco Configuration Professional Express” section on page 6-8 to configure the router.

  • Page 96: Configuring The Router Hostname

    Specifies or modifies the hostname for the network server. hostname name Example: Router(config)# hostname myrouter Step 4 Verify that the router prompt displays your new — hostname. Example: myrouter(config)# Step 5 (Optional) Returns to privileged EXEC mode. Example: myrouter# end Cisco 1900 Series Hardware Installation 6-10 OL-19084-02...

  • Page 97: Configuring The Enable And Enable Secret Passwords

    We recommend that you use the enable secret command because it uses an improved encryption algorithm. Use the enable password command only if you boot an older image of the Cisco IOS software or if you boot older boot ROMs that do not recognize the enable secret command.

  • Page 98: Configuring The Console Idle Privileged Exec Timeout

    When you configure the console line, you can also set communication parameters, specify autobaud connections, and configure terminal operating parameters for the terminal that you are using. For more information on configuring the console line, see the Cisco IOS Configuration Fundamentals and Network Management Configuration Guide. In particular, see the “Configuring Operating Characteristics for Terminals”...
  • Page 99 The following example shows how to set the console idle privileged EXEC timeout to 2 minutes 30 seconds: line console exec-timeout 2 30 The following example shows how to set the console idle privileged EXEC timeout to 10 seconds: line console exec-timeout 0 10 Cisco 1900 Series Hardware Installation 6-13 OL-19084-02...

  • Page 100: Configuring Gigabit Ethernet Interfaces

    For comprehensive configuration information on Gigabit Ethernet interfaces, see the “Configuring LAN Interfaces” chapter of the Cisco IOS Interface and Hardware Component Configuration Guide, http://www.cisco.com/en/US/docs/ios/12_2/interface/configuration/guide/icflanin.html For information on interface numbering, see the software configuration guide for your router.
  • Page 101 Sample Output for the show ip interface brief Command Router# show ip interface brief Interface IP-Address OK? Method Status Protocol GigabitEthernet0/0 172.16.3.3 YES NVRAM GigabitEthernet0/1 unassigned YES NVRAM administratively down down Router# Cisco 1900 Series Hardware Installation 6-15 OL-19084-02...

  • Page 102: Specifying A Default Route Or Gateway Of Last Resort

    The Cisco IOS software uses the gateway (router) of last resort if it does not have a better route for a packet and if the destination is not a connected network. This section describes how to select a network as a default route (a candidate route for computing the gateway of last resort).

  • Page 103: Gateway Of Last Resort

    In the case of RIP, there is only one choice, network 0.0.0.0. In the case of IGRP, there might be several networks that can be candidates for the system default. The Cisco IOS software uses both administrative distance and metric information to determine the default route (gateway of last resort).
  • Page 104 Gateway of last resort is 172.28.99.2 to network 192.168.24.0 172.24.0.0 255.255.255.0 is subnetted, 1 subnets 172.24.192.0 is directly connected, FastEthernet0 172.24.0.0 255.255.0.0 [1/0] via 172.28.99.0 192.168.24.0 [1/0] via 172.28.99.2 172.16.0.0 255.255.255.0 is subnetted, 1 subnets 172.16.99.0 is directly connected, FastEthernet1 Router# Cisco 1900 Series Hardware Installation 6-18 OL-19084-02...

  • Page 105: Configuring Virtual Terminal Lines For Remote Console Access

    The router has five virtual terminal lines by default. However, you can create additional virtual terminal lines as described in the Cisco IOS Terminal Services Configuration Guide, Release 12.4. See the Configuring Terminal Operating Characteristics for Dial-In Sessions section.

  • Page 106: Configuring The Auxiliary Line

    After you configure the vty lines, follow these steps: (Optional) To encrypt the virtual terminal line password, see the “Configuring Passwords and • Privileges” chapter in the Cisco IOS Security Configuration Guide. Also see the Cisco IOS Password Encryption Facts tech note.
  • Page 107 0 the auxiliary line. Example: Router(config)# line aux 0 Step 4 See the tech notes and sample configurations to — configure the line for your particular implementation of the AUX port. Cisco 1900 Series Hardware Installation 6-21 OL-19084-02...

  • Page 108: Verifying Network Connectivity

    Extended commands [n]: Sweep range of sizes [n]: Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 192.168.7.27, timeout is 2 seconds: !!!!! Success rate is 100 percent, round-trip min/avg/max = 1/2/4 ms Cisco 1900 Series Hardware Installation 6-22 OL-19084-02...

  • Page 109: Saving Your Router Configuration

    To aid file recovery and minimize downtime in case of file corruption, we recommend that you save backup copies of the startup configuration file and the Cisco IOS software system image file on a server. Cisco 1900 Series Hardware Installation...
  • Page 110 {flash0|flash1}: tftp: privileged EXEC command to copy the system image (c3900-2is-mz) to a TFTP server. The router uses the default username and password. Cisco 1900 Series Hardware Installation 6-24 OL-19084-02...

  • Page 111: Verifying The Initial Configuration

    • When you have completed and verified the initial configuration, the specific features and functions are ready to be configured. See the Cisco 1900 Series, 2900 Series, and 3900 Series Software Configuration Guide. If you need help with the interface and port numbering, see the “Interface Numbering”...
  • Page 112 Chapter 6 Configuring the Router Verifying the Initial Configuration Cisco 1900 Series Hardware Installation 6-26 OL-19084-02...

  • Page 113: Activating A New Software Package Or Feature

    Purchase the software package or feature you want to install. You will receive a product activation key (PAK) with your purchase. Step 2 If you do not have a Cisco.com username and password, register for an account at the following URL, https://tools.cisco.com/RPF/register/register.do. Step 3...

  • Page 114: Rma License Transfer

    Install License RMA License Transfer To transfer a software license from a failed device to a new device, go to the Cisco licensing portal at http://www.cisco.com/go/license. You will need the SN and PID of the defective device, as well as the RMA router to initiate an RMA Note replacement license.

  • Page 115: C H A P T E R 7 Getting Software Licenses For The Router

    Getting Software Licenses for the Router Additional Information Additional Information See the Software Activation on Cisco Integrated Services Routers and Cisco Integrated Service Routers Generation 2 document on Cisco.com for detailed information on about software activation on Cisco ISR G2 platforms.
  • Page 116 Chapter 7 Getting Software Licenses for the Router Additional Information Cisco 1900 Series Hardware Installation OL-19084-02...

Table of Contents