Cisco 1941W Configuration Manual page 106
Cisco 3900 series, cisco 2900 series,
cisco 1900 series
Hide thumbs
Also See for 1941W:
- Hardware installation manual (102 pages) ,
- Installing and upgrading (24 pages)
Table of Contents
Advertisement
Configuring Backup Interfaces
SUMMARY STEPS
1.
2.
3.
4.
DETAILED STEPS
Command
Step 1
interface type number
Example:
Router(config)# interface atm 0/0/0
Router(config-if)#
Step 2
backup interface interface-type
interface-number
Example:
Router(config-if)# backup interface bri
0/0/1
Router(config-if)#
Step 3
backup delay enable-delay disable-delay
Example:
Router(config-if)# backup delay enable
delay
Step 4
exit
Example:
Router(config-if)# exit
Router(config)#
Cisco 3900 Series, Cisco 2900 Series, and Cisco 1900 Series Integrated Services Routers Generation 2 Software Configuration Guide
98
interface type number
backup interface interface-type interface-number
backup delay enable-delay disable-delay
exit
Chapter
Configuring Backup Data Lines and Remote Management
Purpose
Enters interface configuration mode for the
interface for which you want to configure backup.
The example shows configuration of a backup
interface for an ATM WAN connection.
Assigns an interface as the secondary or backup
interface.
This can be a serial interface or an asynchronous
interface. For example, a serial 1 interface could
be configured to back up a serial 0/2/1 interface.
The example shows a BRI interface configured as
the backup interface for the ATM 0/0/0 interface.
Specifies the delay between the physical interface
going down and the backup interface being
enabled, and the delay between the physical
interface coming back up and the backup interface
being disabled.
Exits configuration interface mode.
OL-20696-04
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
