Mac Address; Online Insertion And Removal - Cisco 7200 VXR User Manual
Hide thumbs
Also See for 7200 VXR:
- User manual (178 pages) ,
- Product overview (64 pages) ,
- Quick start manual (48 pages)
Table of Contents
Advertisement
Chapter 1
Cisco 7200 VXR Product Overview
Encapsulation ARPA, loopback not set
Keepalive not set
Full-duplex, 100Mb/s, 100BaseTX/FX
ARP type:ARPA, ARP Timeout 04:00:00
For complete descriptions and instructions of the commands used to configure your Cisco 7200 VXR
router, refer to the Configuration Fundamentals Configuration Guide and Configuration Fundamentals
Command Reference publications, which are available on Cisco.com, the Documentation CD-ROM, or
in print.
MAC Address
All LAN interfaces (ports) require unique MAC addresses, also known as hardware addresses. Typically,
the MAC address of an interface is stored on a memory component that resides directly on the interface
circuitry; however, the OIR feature requires a different method. (For a description of OIR, see the
"Online Insertion and Removal" section on page
Using OIR you can remove a port adapter and replace it with another identically configured one. If the
new port adapter matches the port adapter you removed, the system immediately brings it online. In
order to enable OIR, an address allocator with unique MAC addresses is stored in an EPROM on the
router midplane. Each address is reserved for a specific port and slot in the router regardless of whether
a port adapter resides in that slot. The MAC addresses are assigned to the slots in sequence. The first
address is assigned to slot 0, and the last address is assigned to slot 4 in the Cisco 7204VXR or to slot 6
in the Cisco 7206VXR. Using this address scheme, you can remove port adapters and insert them into
other routers without causing the MAC addresses to move around the network or be assigned to multiple
devices.
Note that if the MAC addresses were stored on each port adapter, OIR would not function because you
could never replace one port adapter with an identical one; the MAC addresses would always be
different. Also, each time a port adapter was replaced, other devices on the network would have to update
their data structures with the new address. If the other devices did not update quickly enough, the same
MAC address could appear in more than one device at the same time.
Storing the MAC addresses for every slot in one central location means the addresses stay with the
Note
memory device on which they are stored.
Online Insertion and Removal
All port adapters and service adapters in the Cisco 7200 VXR routers support online insertion and
removal (OIR). However, it is wise to shut down the interface before removing a port adapter that has
active traffic moving through it. Removing a port adapter while traffic is flowing through the ports can
cause system disruption. Once the port adapter is inserted, the ports can be brought back up.
As you disengage the port adapter from the router or switch, online insertion and removal (OIR)
Note
administratively shuts down all active interfaces in the port adapter.
78-5469-04 B0
reliability 255/255, txload 1/255, rxload 1/255
(display text omitted)
1-53.)
Cisco 7200 VXR Installation and Configuration Guide
Functional Overview
1-53
Advertisement
Table of Contents
