Cisco 7200 VXR User Manual page 42

Hide thumbs Also See for 7200 VXR:

Table of Contents

Field-Replaceable Units

Table 1-25 C7200-I/O-2FE/E I/O Controller LEDs

LED

100 Mbps

LINK

Input/Output Controller C7200-I/O-FE LEDs

Figure 1-24

MII receptacle and an RJ-45 receptacle (C7200-I/O-FE), and

I/O controller model. Also see

Cisco 7200 VXR Installation and Configuration Guide

1-42

Color

Function

Green

Indicates that the port is configured for 100-Mbps operation (speed 100),

or if configured for autonegotiation (speed auto), the port has detected a

valid link at 100 Mbps.

If the port is configured for 10-Mbps operation, or if it is

Note

configured for autonegotiation and the port has detected a valid

link at 10 Mbps, the LED remains off.

Green

Indicates that the Ethernet/Fast Ethernet RJ-45 receptacle has established

a valid link with the network. This LED remains off during normal

operation of the router unless there is an incoming carrier signal.

shows the LEDs on the I/O controller with the Fast Ethernet port that is equipped with an

Table 1-22

Chapter 1

Table 1-26

for LEDs common to all I/O controllers.

Cisco 7200 VXR Product Overview

lists the LEDs specific to this

78-5469-04 B0

Table of Contents