Table of Contents
Advertisement
Dual-Band Wireless A+G Broadband Router
The Setup Tab - MAC Address Clone
A MAC address is a 12-digit code assigned to a unique piece of hardware for identification. Some ISPs will
require you to register a MAC address in order to access the Internet. If you do not wish to re-register the MAC
address with your ISP, you may assign the MAC address you have currently registered with your ISP to the Router
with the MAC Address Clone feature.
MAC Address Clone
Enabled/Disabled. To have the MAC Address cloned, select Enabled from the drop-down menu.
MAC Address. Enter the MAC Address registered with your ISP here.
Clone My PC's MAC. Clicking this button will clone the MAC address of the PC you are currently using.
Change these settings as described here and click the Save Settings button to apply your changes or Cancel
Changes to cancel your changes. Help information is shown on the right-hand side of the screen. For additional
information, click More.
Chapter 5: Configuring the Dual-Band Wireless A+G Broadband Router
The Setup Tab - MAC Address Clone
Figure 5-8: Setup Tab - MAC Address Clone
mac address: the unique address that a
manufacturer assigns to each networking device.
17
Advertisement
Table of Contents
