Page 1
® A Division of Cisco Systems, Inc. Package Contents • Wireless-G Router for 3G/UMTS Broadband • Setup CD-ROM • Quick Installation Guide • User Guide on CD-ROM • Power Adapter • 2 x RJ-45 Ethernet Cables 24 , Wireless-G 802.11g...
Page 2
Configuring the WRT54G3G via the Setup Wizard Insert the Setup CD-ROM into your CD-ROM drive. The Setup Wizard should run automatically and the Welcome screen should appear. If it does not, click Start and then Run. In the field provided, enter D:\WRT54G3G.exe (if “D”...
Page 3
WRT54G3G Setup for 3G/UMTS or GPRS Network Only Before you begin, make sure that you have your Vodafone Mobile Connect Card Services information, which was supplied with your Mobile Connect Card package at the time of purchase. If you do not have this information, call Vodafone Customer Services.
Page 4
WRT54G3G Setup for Broadband WAN Only Make sure that the 3G/UMTS Router is powered off. Disconnect the cable that connects your cable or DSL modem to your PC. Plug the cable from the modem into the Router’s blue Internet port. This is the same cable that you just disconnected from your computer.
Page 5
Connect the power adapter to the Router's Power port and the other end to an electrical outlet. On the Router's front panel, the Power, Internet, and at least one of the numbered (1, 2, 3 or 4) LEDs should be lit. If not make sure the cables are securely connected.
Page 6
WRT54G3G Setup for Broadband WAN and 3G/UMTS or GPRS Before you begin, make sure that you have your Vodafone Mobile Connect Card Services information, which was supplied with your Mobile Connect Card package at the time of purchase. If you do not have this information, call Vodafone Customer Services.
Page 7
Plug the other end of the network cable into one of the Router’s yellow ports numbered 1 to 4. Connect the power adapter to the Router's Power port and the other end to an electrical outlet. On the Router's front panel, the Power, Internet, and at least one of the numbered (1, 2, 3 or 4) LEDs should be lit.
Page 8
Configuring the Vodafone 3G/UMTS or GPRS Service If the Mobile Connect Card is not inserted or recognized, you will be prompted to insert a Vodafone Mobile Connect 3G/UMTS Card. If you wish to configure the Router without your Vodafone Mobile Connect 3G/UMTS Card, proceed to step 7;...
Page 9
Based on the SIM country settings, the following information will be displayed: Home Network Service 3G/UMTS/GPRS connection Username (country dependent) Password (country dependent) Pin code (SIM card dependent) Choose: • the required Service option. • the required Connect method. The selected settings are displayed, as shown in Figure E.
Page 10
Configure the Broadband WAN Service (Internet Port) NOTE: If the Internet connection type you use is not listed here, keep the default, Cable (DHCP) for now, and click the Next button. After you have completed the Setup Wizard, you will use the Router’s Web- based Utility to configure the Internet connection type settings.
Page 11
Configuring the Password Setting Create a new password and enter it in the new Password field. Re-enter the password in the Confirm field. Proceed to step 8.
Configuring the Wireless Settings Wireless Network Name (SSID). The SSID is the network name shared among all points in a wireless network. The SSID must be identical for all points in the wireless network. It is case- sensitive and must not exceed 32 characters (use any of the characters on the keyboard).
Page 13
WRT54G3G Setup for 3G/UMTS or GPRS and Broadband WAN Choose one of the listed wireless security options: Disable WEP (64-Bit) WEP (128-Bit) WPA-Personal Based on the selection you made in step A, the corresponding Wireless Security Settings screen will appear. Complete the requested fields by following the instructions on the setup screens.