Lan Troubleshooting; Procedure 1; Diagnostic Test Program Execution Check; Connector Check And Replacement Check - Toshiba Satellite U400 Maintenance Manual
Hide thumbs
Also See for Satellite U400:
- Maintenance manual (305 pages) ,
- User manual (177 pages) ,
- Brochure & specs (2 pages)
Table of Contents
Advertisement
2.12 LAN Troubleshooting
To check if the computer's LAN is malfunctioning or not, follow the troubleshooting
procedures below as instructed.
Procedure 1:
Procedure 2:
Procedure 1
Execute LAN test in the LAN/Modem test program. Refer to Chapter 3, Tests and Diagnostics
for more information on how to perform the test program.
If any error is detected by the test, go to Procedure 2.
Procedure 2
The LAN function is embedded on system board. If LAN malfunctions, its connection is
defective or LAN cable and system board may be faulty.
Check 1
Make sure LAN cable is firmly connected to the connector CN9. If the problem
still occurs, perform Check 2.
Check 2
LAN cable may be faulty. Replace it with a new one. If the problem still occurs,
perform Check 3.
Check 3
System board may be faulty. Replace it with a new one following the instruction in
Chapter 4.
2-42
Downloaded from LpManual.com Manuals
Diagnostic Test Program Execution Check
Connector Check and Replacement Check
Diagnostic Test Program Execution Check
Connector Check and Replacement Check
Satellite U400/Satellite Pro U400/PORTEGE M800 Maintenance Manual
Chapter2Troubleshooting Procedures
Advertisement
Chapters
Table of Contents
Troubleshooting
