Obtaining The Access Point Image File; Obtaining The Tftp Server Software - Cisco Aironet 1130AG Hardware Installation Manual
Hide thumbs
Also See for Aironet 1130AG:
- Hardware installation manual (132 pages) ,
- Quick start manual (49 pages) ,
- Datasheet (13 pages)
Table of Contents
Advertisement
Chapter 6
Troubleshooting
Enter the access point password in the Password field and press Enter. The Summary Status page
Step 4
appears.
Click the System Software tab and then click Software Upgrade. The HTTP Upgrade screen appears.
Step 5
Click the TFTP Upgrade tab.
Step 6
Enter the IP address for the TFTP server in the TFTP Server field.
Step 7
Enter the file name for the access point image file (such as c1130-k9w7-tar.123-2.JA.tar) in the Upload
Step 8
New System Image Tar File field. If the file is located in a subdirectory of the TFTP server root directory,
include the relative path of the TFTP server root directory with the filename. If the file is located in the
TFTP root directory, enter only the filename.
Click the Upload button.
Step 9
When a message appears that indicates the upgrade is complete, click OK.
Step 10
For additional information click the Help icon on the Software Upgrade screen.
Obtaining the Access Point Image File
The access point image file can be obtained from the Cisco.com software center using these steps:
Use your Internet browser to access the Cisco Software Center at the following URL:
Step 1
http://www.cisco.com/public/sw-center/sw-wireless.shtml
Step 2
Click Option 2: Aironet Wireless Software Display Tables.
Find the access point firmware and utilities section and click Cisco Aironet 1130AG Series (Cisco IOS
Step 3
Software).
Step 4
Click on the access point image file, such as c1130-k9w7-tar.123-2.JA.tar.
On the Encryption Authorization Form, enter the requested information, read the encryption
Step 5
information, and check the boxes that apply.
Click Submit.
Step 6
Read and accept the terms and conditions of the Software License Agreement.
Step 7
Select the image file again to download it.
Step 8
Download and save the image file to your hard drive and then exit the Internet browser.
Step 9
Obtaining the TFTP Server Software
You can download TFTP server software from several web sites. Cisco recommends the shareware TFTP
utility available at this URL:
http://tftpd32.jounin.net
Follow the instructions on the website for installing and using the utility.
OL-6226-02
Cisco Aironet 1130AG Series Access Point Hardware Installation Guide
Obtaining the Access Point Image File
6-19
- Quick Links:
- Ethernet Port
- Checking the Access Point Leds
Hide quick links:
Advertisement
Table of Contents
