Recommended Maintenance Schedule(s)
Maintenance
Maintenance Procedure
Service Interval
Flush the system with clean water after each use,
especially when hard water has been used. Note: Do
Daily
not apply lubricating oils, grease or other petroleum
products to the compressor motor assembly.
Winterizing
1. Relieve the pressure within the tank by pulling the
release valve on the tank.
2. Disconnect the air and liquid tubing from the tank
Every 400 hours or
cap. Connect the air and water tubing together with
yearly
the supplied tubing coupler.
3. Turn on the foam marker for 5 minutes on each
side. This will remove solution from the solenoids and
avoid damage from freezing.
4. Disassemble the foam nozzles and replace the
foam sponges.
5. Empty the tank of all soap and liquids to avoid
damage from freezing.
Page 238 of 263