Service Aids; Field Programming; Table 4-2. Service Aids - Motorola APX 5000 Service Manual
Hide thumbs
Also See for APX 5000:
- Service manual (438 pages) ,
- Quick reference card (2 pages) ,
- User manual (45 pages)
Table of Contents
Advertisement
Sec 1: 4-2
4.2
Service Aids
Refer to
Table 4-2
this family of radios. These kits and/or parts are available from the Radio Products and Solutions
Organization offices listed in
these items are available from Motorola, most are standard shop equipment items, and any
equivalent item capable of the same performance may be substituted for the item listed.
Motorola Part
Number
5880384G68
SMA to BNC Adapter
66009254001
APX Battery Adapter
66009256001
Volume Potentiometer Outer
Spanner Bit
66009258001
Antenna Spanner Bit
66009259001
Vacuum Adapter
66009260002
Board Analysis Fixture
NLN9839_
Vacuum Pump Kit
NTN4265_
Pressure Pump Kit
RVN5224_
Customer Programming
Software (CPS) and Tuner
Software
PMKN4012_
Programming Cable
PMKN4013_
Programming/Service Cable
RLN4510_
7.5 Volt Universal Battery
Eliminator
RLN4460_
Portable Test Set
4.3
Field Programming
This family of radios can be aligned and programmed in the field. This requires specific equipment
and special instructions. Refer to the online help in the Customer Programming Software (CPS) for
complete field programming information.
Recommended Test Equipment and Service Aids: Service Aids
for a listing and description of the service aids designed specifically for servicing
"Appendix B Replacement Parts Ordering" on page
Table 4-2. Service Aids
Description
Application
Adapts radio's antenna port to BNC cabling of test equipment.
Used in place of battery to connect radio to an external power
supply. Requires RLN4510_.
Used to assemble and disassemble the spanner nut on the
volume potentiometer.
Used to assemble and disassemble the spanner nut on the
antenna bushing.
Submersible radios only. Connects the vacuum/pressure hose
to the radio.
Special fixture that allows radio's internal board to be mounted
externally. Provides easy access to electronic circuits,
required for board-level troubleshooting.
Submersible radios only. Vacuum pump with gauge and
vacuum hose. Requires 66009259001 Adapter Kit.
Submersible radios only. Pressure pump with gauge and
pressure hose. Requires 66009259001 Adapter Kit.
CPS allows customer-specific programming of modes and
features. Tuner software required to perform alignment of
radio parameters.
Used to program the radio through Customer
Programming Software and Tuner Software.
Used to program and service the radio through Customer
Programming Software and Tuner Software.
Used in conjunction with the 66009254001 to adjust the
supply voltage to 7.5 Vdc. Allows a multimeter to be attached
for monitoring and adjusting voltage and current levels.
Used for radio performance checks. Connects to radio's
universal connector and allows remote switching and signal
injection/outputs for test equipment measurements.
B-1. While all of
Advertisement
Chapters
Table of Contents
Troubleshooting
