Disassembly/Reassembly Procedures: Serviceable Components of the Main Sub-Assemblies
8.8.4.3 Back up Battery
1. Complete steps from
2. Remove the battery with the Black Stick.
NOTE: Make sure the positive side is facing upwards.
3. Press the new battery into the battery carrier until it is secured and fully snapped into place.
NOTE: There are no serviceable components on the RF Board Assembly.
8.8.5
Servicing of Expansion Board Assembly
1. Complete steps
NOTE: There are no serviceable components on the Expansion Board Assembly.
8.8.6
Servicing Back Chassis Assembly (B) – Dual Display Versions
1. Complete steps
NOTE: Take care not to damage the Color Display during disassembly.
Section 8.7.1.
8.7.1
through
Figure 8-35. Expansion Board Assembly
8.7.1
through
Mic Boot (4)
Mic Membrane (5)
)
Mic Mesh (6
Lens (7)
Figure 8-36. Back Chassis Assembly (Dual Display Versions)
through
Section 8.7.7.
8.7.3
of
section 8.7 on page
Expansion Board Assembly (H)
8.7.5
of
section 8.7 on page
of
section 8.7 on page
2:8-13.
2:8-13.
Color Display (8)
Back Chassis Assembly (3)
Sec 2: 8-25
2:8-13.