Sending a fax at the end of a
conversation
At the end of a conversation, you can send a
fax to the other party before you both hang
up.
a
Ask the other party to wait for fax tones
(beeps) and then to press the Start or
Send key before hanging up.
b
Load your document.
c
Press Fax Start.
If you are using the scanner glass,
press Send to send the fax.
d
Replace the handset of the external
phone.
Dual Access
(Monochrome only)
You can dial a number and start scanning the
fax into memory—even when the machine is
sending from memory, receiving faxes or
printing PC data. The Touchscreen shows
the new job number.
The number of pages you can scan into the
memory will vary depending on the data that
is printed on them.
NOTE
If the Out of Memory message
appears, press
Send Now to send the pages scanned so
far.
or Quit to cancel or
Broadcasting
(Monochrome only)
3
Broadcasting is automatically sending the
same fax message to more than one fax
number. You can include Groups, Address
Book numbers, and up to 50 manually dialled
numbers in the same broadcast.
After the broadcast is finished, a Broadcast
Report will be printed.
Before you begin the broadcast
Address Book numbers must be stored in the
machine's memory before they can be used
in a broadcast. (See Basic User's Guide:
Storing Address Book numbers.)
Group numbers must also be stored in the
machine's memory before they can be used
in a broadcast. Group numbers include many
stored Address Book numbers for easier
dialling. (See Setting up Groups for
3
Broadcasting on page 33.)
How to broadcast a fax
a
Load your document.
b
Do one of the following:
When Fax Preview is set to Off,
press
When Fax Preview is set to On, press
(Fax) and then
(Sending Faxes).
c
Press Options.
d
Swipe up or down, or press a or b to
display Broadcasting.
e
Press Broadcasting.
f
Press Add Number.
Sending a fax
(Fax).
3
3
3
3
13