Packing And Shipping The Machine - Brother MFC-9840CDW User Manual
Hide thumbs
Also See for MFC-9840CDW:
- User manual (263 pages) ,
- Network user's manual (204 pages) ,
- Quick setup manual (53 pages)
Table of Contents
Advertisement
Packing and shipping
the machine
If for any reason you must move or ship your
machine, carefully re-pack the machine in the
original packing material to avoid any
damage during transport. If you do not pack
the machine properly, you could void your
warranty. The machine should be adequately
insured with the carrier.
If the machine must be shipped, please read
the instructions in this section which explains
how to properly prepare your machine for
transport.
WARNING
Once your machine has been set up and
used, we do not recommend that it be
moved or shipped unless absolutely
necessary.
Colour laser printers are complex printing
devices. Moving the machine or shipping it
without properly removing the installed
supplies can result in SEVERE damage to
the machine. As a result, your machine may
not operate properly afterwards.
Failure to properly prepare the machine for
shipping according to the instructions in this
section may
VOID YOUR WARRANTY.
To prevent injuries when moving or lifting
this machine, make sure at least two people
lift the machine together. Be careful not to
pinch your fingers when you put the
machine down.
192
Make sure that you have the following parts
for repacking:
C
1 Insertion sheet for repacking
2 Plastic bag for the waste toner box
3 Orange protective cover and plastic bag
that the toner cartridge originally came in
(4 pieces of each)
4 Orange packing material for locking the
drum unit and the belt unit (4 pieces)
5 A piece of paper (Letter or A4) to protect the
belt unit (supplied by the user)
6 Joints for attaching cartons (pieces)
Advertisement
Table of Contents
