Printing Images - Brother MFC-9840CDW User Manual
Hide thumbs
Also See for MFC-9840CDW:
- User manual (263 pages) ,
- Network user's manual (204 pages) ,
- Quick setup manual (53 pages)
Table of Contents
Advertisement
a
Press Menu, 5, 3.
53.PictBridge
1.Paper Size
2.Orientation
3.Date & Time
Select ab or OK
b
To set the PictBridge settings, press a or
b to choose 1.Paper Size,
2.Orientation, 3.Date & Time,
4.File Name, or 5.Print Quality.
Press OK.
c
Press a or b to choose an option for
each menu Setting.
Press OK.
d
Press Stop/Exit.
Repeat b to c for each PictBridge
setting.
Note
• Camera settings are prioritised as long as
your camera is not set to use your
machine's settings (default settings). If
your camera is set to use your machine's
settings, the machine will print your photo
using the settings below.
Machine settings
Paper Size
Orientation
Date & Time
File Name
Print Quality
• Please refer to the documentation
supplied with your camera for more
detailed information on changing
PictBridge settings.
Default settings
A4
Portrait
Off
Off
Normal
Printing photos from a digital camera
Printing images
a
Make sure that your camera is turned
off. Connect your camera to the USB
direct interface (1) on the front of the
machine using a suitable USB cable.
b
Turn on the camera. Make sure your
camera is in PictBridge mode.
When the machine has recognized the
camera, the LCD shows the following
message depending on which mode the
machine is in:
01/09/2008 09:03
Fax Only
Camera Connected
aScan to FTP
Scan to E-mail
Scan to Image
bScan to OCR
Camera Connected
Contrast:-nnonn+
Quality :Auto
Enlg/Red:100%
Tray
:MP>T1
Camera Connected
c
Set your camera to print an image. Set
the number of copies if you are asked.
When the machine starts printing an
image, the LCD will show the following
message:
PictBridge
Printing. Keep...
13
1
89
13
Advertisement
Table of Contents
