Table of Contents
Advertisement
Exiting the Intel
To exit the utility:
1.
From the utility main menu, select 5. Exit, then press <Enter>. The following warning
message appears:
2.
Press <Y> to exit or press <N> to return to the utility main menu.
5.2
Creating a RAID driver disk
A floppy disk with the RAID driver is required when installing a Windows
on a hard disk drive that is included in a RAID set.
The motherboard does not provide a floppy drive connector. You have to use a USB floppy
disk drive when creating a SATA RAID driver disk.
5.2.1
Creating a RAID driver disk without entering the OS
To create a RAID driver disk without entering the OS:
1.
Boot your computer.
2.
Press <Delete> during POST to enter the BIOS setup utility.
3.
Set the optical drive as the primary boot device.
4.
Insert the support DVD into the optical drive.
5.
Save changes and exit BIOS.
6.
When the Make Disk menu appears, press <1> to create a RAID driver disk.
7.
Insert a formatted floppy disk into the USB floppy disk drive, then press <Enter>.
8.
Follow the succeeding screen instructions to complete the process.
5-8
Rapid Storage Technology Option ROM utility
®
[CONFIRM EXIT]
Are you sure you want to exit? (Y/N):
operating system
®
Chapter 5: RAID Configuration
Advertisement
Table of Contents
