Table of Contents
Advertisement
MISC
DRAM Eventual Voltage (CHA/CHB/CHC/CHD) [Auto]
Use <+> or <-> to adjust the eventual voltages of the DIMM slots. The values range
from 0.8 V to 1.9 V with a 0.10 V increment.
DRAM CLK Period [Auto]
This item allows you to set a DRAM clock period.
Configuration options: [Auto] [1] – [19]
Memory optimize Control [Auto]
This item allows you to optimize the memory control.
Configuration options: [Auto] [Enabled] [Disabled]
Enhanced Training (CHA/CHB/CHC/CHD) [Auto]
Configuration options: [Auto] [Enabled] [Disabled]
MemTest [Auto]
This item allows you to enable or disable the memory testing.
Configuration options: [Auto] [Enabled] [Disabled]
Attempt Fast Boot [Auto]
This item allows the portion of the memory reference code to be skipped when possible
to increase boot speed.
Configuration options: [Auto] [Enabled] [Disabled]
Attempt Fast Cold Boot [Auto]
This item allows the portion of the memory reference code to be skipped when possible
to increase boot speed.
Configuration options: [Auto] [Enabled] [Disabled]
DRAM Training [Auto]
This item allows the system to set the training channel status of the installed DRAMs.
Configuration options: [Auto] [Ignore] [Enabled]
DRAM SPD Write [Disabled]
This item allows you to enable/disable the DRAM SPD write for memory SMBus
programming.
Configuration options: [Enabled] [Disabled]
External Digi+ Power Control
CPU Input Boot Voltage [Auto]
This item allows you to set a higher CPU input boot voltage for better overclocking
capability. Use the <+> or <-> keys to adjust the value. The values range from 0.80 V
to 2.7 V with an interval of 10 V.
CPU Load-line Calibration [Auto]
Load-line is defined by Intel
specification and affects CPU power voltage. The CPU
®
working voltage decreases proportionally to CPU loading. Higher load-line calibration
could get higher voltage and good overclocking performance, but increases the CPU
and VRM thermal conditions. Select from levels 1 to 9 to adjust the CPU power voltage
from 0% to 125%.
Configuration options [Auto] [Level 1] - [Level 9]
Chapter 4: BIOS Setup
4-22
Advertisement
Table of Contents
