Table of Contents
Advertisement
6.2
Intel
ROM Utility
The Intel
Matrix Storage Manager Option ROM utility allows you to create RAID
®
0 or RAID 1 from Serial ATA hard disk drives that are connected to the Serial ATA
connectors supported by the Southbridge.
To enter the Intel
1.
Install all the Serial ATA hard disk drives.
2.
Turn on the system.
3.
During POST, press <Ctrl> + <I> to display the utility main menu.
Intel(R) Matrix Storage Manager Option ROM v5.6.2.1002 ICH7R wRAID5
RAID Volumes:
None defined.
Physical Disks:
Port Drive Model
0
Hitachi HDS72161
3
Hitachi HDS72161
The navigation keys at the bottom of the screen allow you to move through
the menus and select the menu options.
The RAID BIOS setup screens shown in this section are for reference only and
may not exactly match the items on your screen.
6-4
Matrix Storage Manager Option
®
Matrix Storage Manager Option ROM utility:
®
Copyright(C) 2003-06 Intel Corporation. All Rights Reserved.
1. Create RAID Volume
2. Delete RAID Volume
3. Reset Disks to Non-RAID
4. Exit
[ DISK/VOLUME INFORMATION ]
Serial #
PVB300Z2R93D3D
PVB300Z2R93D3D
[↑↓]-Select [ESC]-Exit [ENTER]-Select Menu
[
MAIN MENU
]
Size
153.4GB
153.4GB
Type/Status(Vol ID)
Non-RAID Disk
Non-RAID Disk
Chapter 6: RAID Configuration
- Quick Links:
- Jumpers
Hide quick links:
Advertisement
Table of Contents
