Table of Contents
Advertisement
6.3.4
Checking the drives for data consistency
You can check and verify the accuracy of data redundancy in the selected virtual
drive. The utility can automatically detect and/or detect and correct any differences
in data redundancy depending on the selected option in the Objects > Adapter
menu.
The Check Consistency command is available only for virtual drive included in
a RAID 1 set.
Using the Check Consistency
To check data consistency using the Check Consistency command:
1.
From the Management Menu, select Check Consistency, then press
<Enter>.
LSI Software RAID Configuration Utility Ver A.53 Sep 06, 2007
Management Menu
Configure
Initialize
Objects
Rebuild
Check Consistency
Use Cursor Keys to Navigate Between Items And Press Enter To Select An Option
2.
The screen displays the available RAID set(s) and prompts you to select the
virtual drive to check. Press the <Spacebar> to select the virtual drive from
the Virtual Drive selection, then press <F10>.
LSI Software RAID Configuration Utility Ver A.53 Sep 06, 2007
Management Menu
Configure
Initialize
Objects
Rebuild
Check Consistency
Virtual Drives
Loical Drive 0
ASUS RS100-E5-PI2
CC Of VD(s)
Virtual Drive(s) Configured
LD
RAID
Size
0 1 154494MB 2 64 KB ONLINE
Select VD
SPACE-(De)Select, F10-Check Consistency
#Stripes
StripSz
Status
6-25
- Quick Links:
- Jumpers
Hide quick links:
Advertisement
Table of Contents
