Firewall Rules - D-Link DIR-412 User Manual

Mobile wireless router

Hide thumbs Also See for DIR-412:

Table of Contents

Section 3 - Configuration

To create a firewall rule, configure the parameters as described below:

Name:

Enter a name for the firewall rule.

Action:

Use the drop-down menu to specify if the router should Allow or

Deny traffic matching the firewall rule.

Interface:

Use the drop-down menus to select the Source and Destination

interfaces for the Firewall Rule

Use the IP Address fields next to each Interface drop-down

menu to specify the IP address ranges for the Source/Destination

interfaces.

The first host in the IP address range should be entered in the top

field and the last host in the IP address range should be entered in

the field beneath for both the Source/Destination intefaces.

Protocol:

Use the drop-down menu to select the protocol that will be used for

the firewall rule (TCP, UDP, ICMP, or ALL).

Port Range:

Enter the range of ports that the firewall rule will apply to.

The first port in the port range should be entered in the top field

and the last host in the port range should be entered in the field

beneath.

Schedule:

Use the drop-down menu to select the schedule for the Network

Filter rule. Click the New Schedule button to bring up the "Schedule

Webpage" to configure the new schedule.

D-Link DIR-412 User Manual

Firewall Rules

Table of Contents