Dynamic Ip Address (Dhcp) - D-Link DIR-412 User Manual

Mobile wireless router

Hide thumbs Also See for DIR-412:

Table of Contents

Section 3 - Configuration

Choose Dynamic IP (DHCP) from the My Internet Connection is drop-down menu if all WAN IP information is

obtained from your ISP.

Host Name:

The Host Name is optional but may be required

by some ISPs. The default host name is

the device name of the Router and may be

changed.

DNS Addresses:

Enter the Primary and Secondary DNS server

IP addresses assigned by your ISP.

MTU:

Maximum Transmission Unit - you may need to

change the MTU for optimal performance with

your specific ISP. 1500 is the default MTU.

MAC Address:

The default MAC Address is set to the Internet

port's physical interface MAC address on the

Broadband Router. It is not recommended that

you change the default MAC address unless

required by your ISP. You can use the Clone

Your PC's MAC Address button to replace

the Internet port's MAC address with the MAC

address of your Ethernet card.

D-Link DIR-412 User Manual

Manual Configuration (WAN Mode)

Dynamic IP Address (DHCP)

Table of Contents