Dhcp Reservation - D-Link DIR-412 User Manual

Mobile wireless router

Hide thumbs Also See for DIR-412:

Table of Contents

Section 3 - Configuration

If you want a computer or device to always have the same IP address assigned, you can create a DHCP reservation.

The router will assign the IP address only to that computer or device.

Configure the parameters, as described below, to create a new DHCP Reservation.

Note: This IP address must be within the DHCP IP Address Range.

DHCP

Displays a list of the DHCP reservations that have been configured

Reservations List:

on the router.

Number of

In this section, you can see information about the LAN devices

Dynamic DHCP

that are currently being leased IP addresses.

Clients:

Computer Name:

Enter the computer name or select a computer name from the

drop-down menu on the right-hand side and click <<.

IP Address:

Enter the IP address you want to assign to the computer or device.

This IP Address must be within the DHCP IP Address Range.

Enter the MAC address of the computer or device.

MAC Address:

When you have finished configuring the above settings, check the boxes next to the DHCP Reservation entries you

want to add to the DHCP Reservations List and click the Save Settings button at the top or bottom of the window to

save your entries and activate your reservations.

D-Link DIR-412 User Manual

DHCP Reservation

Table of Contents