Static Ip Address - D-Link DIR-412 User Manual

Mobile wireless router

Hide thumbs Also See for DIR-412:

Table of Contents

Section 3 - Configuration

Choose Static IP (DHCP) from the My Internet Connection is drop-down menu if all the Internet port's IP information

is provided to you by your ISP. You will need to enter in the IP address, subnet mask, gateway address, and DNS

address(es) provided to you by your ISP. Each IP address entered in the fields must be in the appropriate IP form,

which are four octets separated by a dot (x.x.x.x). The Router will not accept the IP address if it is not in this format.

IP Address:

Enter the IP address assigned by your ISP.

Subnet Mask:

Enter the Subnet Mask assigned by your ISP.

Default Gateway:

Enter the Gateway assigned by your ISP.

DNS Servers:

Enter the Primary and Secondary DNS server

IP addresses assigned by your ISP.

MTU:

Maximum Transmission Unit - You may need to

change the MTU for optimal performance with

your specific ISP. 1500 is the default MTU.

MAC Address:

The default MAC Address is set to the Internet

port's physical interface MAC address on the

Broadband Router. It is not recommended that

you change the default MAC address unless

required by your ISP. You can use the Clone

Your PC's MAC Address button to replace

the Internet port's MAC address with the MAC

address of your Ethernet card.

D-Link DIR-412 User Manual

Manual Configuration (WAN Mode)

Static IP Address

Table of Contents