Configure The Traffic Policy - Cisco ASR 9000 Series System Configuration Manual
Aggregation services router nv
Hide thumbs
Also See for ASR 9000 Series:
- Command reference manual (1138 pages) ,
- Routing configuration manual (702 pages) ,
- Reference manual (696 pages)
Table of Contents
Advertisement
Configure the Traffic Policy
Configure the Traffic Policy
This procedure creates both the child policy and the parent policy and applies the child policy to the parent
policy.
SUMMARY STEPS
1. configure
2. policy-map child-policy-map-name
3. class {class-name | class-default}
4. bandwidth {rate [units] | percent percentage-value} or bandwidth remaining [percent percentage-value
| ratio ratio-value]
5. end-policy-map
6. configure
7. policy-map parent-policy-map-name
8. class class-default
9. shape average rate [units]
10. service-policy child-policy-map-name
11. end-policy-map
DETAILED STEPS
Command or Action
Step 1
configure
Step 2
policy-map child-policy-map-name
Example:
RP/0/RSP0/CPU0:router(config-pmap)# policy-map
child-policy
Step 3
class {class-name | class-default}
Example:
RP/0/RSP0/CPU0:router(config-pmap)# class class4
Step 4
bandwidth {rate [units] | percent percentage-value}
or bandwidth remaining [percent percentage-value |
ratio ratio-value]
Example:
RP/0/RSP0/CPU0:router(config-pmap-c)# bandwidth
percent 30
or
RP/0/RSP0/CPU0:router(config-pmap-c)# bandwidth
remaining percent 80
Cisco ASR 9000 Series Aggregation Services Router nV System Configuration Guide, Release 5.3.x
96
Configuring QoS on the Satellite System
Purpose
Creates a child policy map and enters the policy map
configuration mode.
Assigns the traffic class that you specify to the policy map.
Enters policy map class configuration mode.
Specifies the minimum bandwidth allocated to a class as a
percentage of link bandwidth.
Specifies how to allocate excess bandwidth to a class.
Repeat Steps 3 and 4 to include additional
Note
class-maps to the child-policy
Advertisement
Table of Contents
