Ip Domain-Lookup - Dell S4810 Reference Manual

Hide thumbs Also See for S4810:

Table of Contents

the name is not resolved, the software goes through the list of names configured

with the ip domain-list command to find a match.

To enable dynamic resolution of hosts, use the following steps:

To view current bindings, use the show hosts command. To view a DNS-related

configuration, use the show running-config resolve command.

ip domain-name

ip domain-lookup

To address resolution (that is, DNS), enable dynamic host-name.

ip domain-lookup

To disable DNS lookup, use the no ip domain-lookup command.

CONFIGURATION

This guide is platform-specific. For command information about other platforms,

refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version 9.0.2.0

Version 8.3.11.1

Version 8.3.7.0

Version 8.1.1.0

Version 7.6.1.0

Version 7.5.1.0

To fully enable DNS, also specify one or more domain name servers with the ip

name-server command.

IPv4 Routing

specify a domain name server with the ip name-server command

enable DNS with the ip domain-lookup command

— specifies a DNS server.

Introduced on the S6000.

Introduced on the S4820T.

Introduced on the Z9000.

Introduced on the S4810.

Introduced on the E-Series ExaScale.

Introduced on the S-Series.

Introduced on the C-Series.

Show Quick Links

Table of Contents