Cisco ASR 9000 Series Configuration Manual page 29
Configuring clear channel t3/e3 and
channelized t3 and t1/e1 controllers on the
cisco asr 9000 series router
Hide thumbs
Also See for ASR 9000 Series:
- Command reference manual (1138 pages) ,
- Routing configuration manual (702 pages) ,
- Reference manual (696 pages)
Advertisement
Configuring Clear Channel T3/E3 and Channelized T3 and T1/E1 Controllers on the Cisco ASR 9000 Series Router
Command or Action
Step 8
channel-group channel-group-number
Example:
RP/0/RSP0/CPU0:router(config-e1)# channel-group
0
Step 9
timeslots range
Example:
RP/0/RSP0/CPU0:router(config-e1-channel_group)#
timeslots 1-16
Step 10
speed kbps
Example:
RP/0/RSP0/CPU0:router(config-e1-channel_group)#
speed 100
Step 11
exit
Example:
RP/0/RSP0/CPU0:router(config-e1-channel_group)#
exit
Step 12
Repeat Step 8 through Step 11 to assign time slots to a
channel group.
Step 13
exit
Example:
RP/0/RSP0/CPU0:router(config-e1)# exit
OL-32684-01
How to Configure Clear Channel T3/E3 Controllers and Channelized T1/E1 Controllers
Cisco ASR 9000 Aggregation Services Router Interface and Hardware Component Configuration Guide
Purpose
Creates an E1 channel group and enters channel group
configuration mode for that channel group.
Associates one or more time slots to a channel group and
creates an associated serial subinterface on that channel
group.
Range is from 1 to 31 time slots.
•
You can assign all 31 time slots to a single channel
•
group, or you can divide the time slots among several
channel groups.
Each E1 controller supports a total of 31 DS0 time
Note
slots.
(Optional) Specifies the speed of the DS0s in kilobits per
second. Valid values are 56 and 64.
The default speed is 64 kbps.
Note
Exits channel group configuration mode
—
Exits E1 configuration mode
473
Advertisement
