Table of Contents
Advertisement
connect the power supply to a standard power outlet in your workspace.
connect the power supply to a standard power outlet in your workspace.
Step 4: push the on/off switch on the back of the phone to the on side, then the phone's LCD screen displays "Initializing
push the on/off switch on the back of the phone to the on side, then the phone's LCD screen displays "Initializing
push the on/off switch on the back of the phone to the on side, then the phone's LCD screen displays "Initializing
wait logon". Later, a ready screen typically displays the date, time.
wait logon". Later, a ready screen typically displays the date, time.
If your LCD screen displays different information from the above, you need refer to the next section "Initial setting" to set
If your LCD screen displays different information from the above, yo
your network online mode.
If your VoIP phone registers into corporate IP telephony Server, your phone is ready to use.
If your VoIP phone registers into corporate IP telephony Server, your phone is ready to use.
2.1.2. Power adaptor connection
Make sure that the power you use is comply with the parameters of power adaptor.
Make sure that the power you use is comply wit
1. Plug power adaptor to power socket.
2. Plug power adaptor's AC output to the AC5V port of
Plug power adaptor's AC output to the AC5V port of SVP2000P to start up.
3. There will be displayed black line and "initializing... wait logon..." on the screen. After finishing startup, p
There will be displayed black line and "initializing... wait logon..." on the screen. After finishing startup, phone will show
There will be displayed black line and "initializing... wait logon..." on the screen. After finishing startup, p
greeting, current date and time and so forth.
greeting, current date and time and so forth.
4. If phone has registered to the server, you can place or answer calls.
If phone has registered to the server, you can place or answer calls.
2.2. Basic Initialization
SVP2000P is provided with a plenty of functions and parameters for configuration. User needs some network and VoIP
is provided with a plenty of functions and parameters for configuration. User needs some network and VoIP
is provided with a plenty of functions and parameters for configuration. User needs some network and VoIP
knowledge so that user could understand the meanings of parameters. In order to make user use the phone more easily
knowledge so that user could understand the meanings of parameters. In order to make user use the phone more easily
knowledge so that user could understand the meanings of parameters. In order to make user use the phone more easily
and convenient, there are basic configurations introduced which is mandatory to ensure phone calls.
2.2.1. Network settings
Make sure that network is connected already before setting network of phone.SVP2000P uses DHCP to get WAN IP
Make sure that network is connected already before setting network of phone.
configurations, so phone could access to network as long as there is DHCP server in it. If there is no DHCP server available,
configurations, so phone could access to network as long
phone has to be changed WAN network setting to Static IP or PPPoE.
phone has to be changed WAN network setting to Static IP or PPPoE.
Note: during setting network parameter in menu, Please don't press the
during setting network parameter in menu, Please don't press the
configuration and will return to standby interface.
iguration and will return to standby interface.
Setting PPPoE mode (for ADSL connection)
1. Get PPPoE account and password first.
2. Press
, and press
will display "WAN".
3. Press Soft2 (Enter), then press
4. Press Soft1 (Edit), the screen will display "
4. Press Soft1 (Edit), the screen will display "Account". The screen will show the current account information. Press Soft1
(Del) to delete it, then input your PPPoE account and press Soft2 (Save). W
(Del) to delete it, then input your PPPoE account and press Soft2 (Save). With "saved" displayed, screen will jump to
password settings,
5. Press Soft2 (Edit) again, then input your PPPoE password and press Soft2 (OK), With "Saved" displayed, screen will
5. Press Soft2 (Edit) again, then input your PPPoE password and press Soft2 (OK), With "Saved" displayed, screen will
5. Press Soft2 (Edit) again, then input your PPPoE password and press Soft2 (OK), With "Saved" displayed, screen will
display the current password: ******, and confirm
save the Account and password.
6. Press Soft3 (Quit) once return to "Net Mode
the current net mode.
S T E P H E N T E C H N O L O G I E S C O . , L I M I T E D
T e l : + 8 6 7 5 5 8 9 3 5 2 6 0 6 / F a x : + 8 6 7 5 5 8 9 3 5 2 6 1 2 / E m a i l :
/ F a x : + 8 6 7 5 5 8 9 3 5 2 6 1 2 / E m a i l : S u p p o r t @ s t e p h e n - t e l e . c o m / U r l : w w w . s t e p h e n - t e l e . c o m
onfigurations introduced which is mandatory to ensure phone calls.
onfigurations introduced which is mandatory to ensure phone calls.
twice, screen will show "Network". Then press Soft2 (Enter) or "OK", the LCD screen
twice, screen will show "
, choose PPPoE.
, choose
". The screen will show the current account information. Press Soft1
confirm: you need input the password again, after confirm, press soft2 (OK) to
Net Mode". Press Soft2 (Save) the screen will show "Saved" and then jump to show
". Press Soft2 (Save) the screen will show "Saved" and then jump to show
/ 5 / F , B u i l d i n g N O . 1 , T o n g X i n I n d u s t r y Z o n e , H e n g G a n g , L o n g G a n g , S h e n z h e n , G . D , C h i n a , 5 1 8 1 1 5
/ 5 / F , B u i l d i n g N O . 1 , T o n g X i n I n d u s t r y Z o n e , H e n g G a n g , L o n g G a n g , S h e n z h e n , G . D , C h i n a , 5 1 8 1 1 5
/ 5 / F , B u i l d i n g N O . 1 , T o n g X i n I n d u s t r y Z o n e , H e n g G a n g , L o n g G a n g , S h e n z h e n , G . D , C h i n a , 5 1 8 1 1 5
S V P 2 0 0 0 P P B u s i n e s s
u need refer to the next section "Initial setting" to set
as there is DHCP server in it. If there is no DHCP server available,
". Then press Soft2 (Enter) or "OK", the LCD screen
ith "saved" displayed, screen will jump to
rd again, after confirm, press soft2 (OK) to
B u s i n e s s P O E I P P h o n e U s e r M a n u a l
uses DHCP to get WAN IP
key, or else the phone will not save the
key, or else the phone will not save the
t e l e . c o m
- 8 -
Advertisement
Table of Contents
