Checking Power Connection; Troubleshooting Cisco Unified Ip Phone Security - Cisco 6921 Administration Manual
Administration guide for cisco unified communications manager 8.0 (sccp)
Hide thumbs
Also See for 6921:
- Administration manual (210 pages) ,
- User manual (124 pages) ,
- Features (29 pages)
Table of Contents
Advertisement
Troubleshooting Cisco Unified IP Phone Security
From Cisco Unified Communications Manager, choose System > Server and verify that the server is
Step 4
referred to by its IP address and not by its DNS name.
Step 5
From Cisco Unified Communications Manager, choose Device > Phone > Find and verify that you have
assigned the correct MAC address to this Cisco Unified IP Phone. For information about determining a
MAC address, see the
page
Power cycle the phone.
Step 6
Checking Power Connection
In most cases, a phone will restart if it powers up by using external power but loses that connection and
switches to PoE. Similarly, a phone may restart if it powers up by using PoE and then gets connected to
an external power supply.
Troubleshooting Cisco Unified IP Phone Security
Table 9-1
For information relating to the solutions for any of these issues, and for additional troubleshooting
information about security and encryption, refer to Cisco Unified Communications Manager Security
Guide.
Table 9-1
Cisco Unified IP Phone Security Troubleshooting
Problem
Device authentication error.
Phone cannot authenticate CTL file.
Phone cannot authenticate any of the
configuration files other than the CTL file.
Phone does not register with Cisco Unified
Communications Manager.
Phone does not request signed configuration
files.
Cisco Unified IP Phone 6921, 6941, and 6961 Administration Guide for Cisco Unified Communications Manager 8.0 (SCCP)
9-8
"Determining the MAC Address for a Cisco Unified IP Phone" section on
2-11.
provides troubleshooting information for the security features on the Cisco Unified IP Phone.
Possible Cause
CTL file does not have a Cisco Unified Communications Manager certificate
or has an incorrect certificate.
The security token that signed the updated CTL file does not exist in the CTL
file on the phone.
Bad TFTP record.
The CTL file does not contain the correct information for the Cisco
Unified Communications Manager server.
The CTL file does not contain any TFTP entries with certificates.
Chapter 9
Troubleshooting and Maintenance
OL-20851-01
Advertisement
Table of Contents
Troubleshooting
