What's On The Back Panel - Cisco TES301 User Manual
Ip managed services home gateway
Hide thumbs
Also See for TES301:
- User manual (98 pages) ,
- User manual (92 pages) ,
- Quick reference manual (2 pages)
Table of Contents
Advertisement
Chapter 1 Introducing the TES301 IP Managed Services Home Gateway
What's on the Back Panel?
The back panel of your TES301 provides ports, power, and reset mechanisms. Refer
to the following diagram for a description of the back panel.
Note: This illustration may vary from the actual product.
1
Power—The Power port is where you will connect the power adapter that is
included in the box.
2
Power Switch—Use this switch to power on or off the TES301.
3
Phone 1-2—The Phone ports connect standard analog telephones to the TES301.
4
Internet—The Internet port connects to the Ethernet port on the DSL, fiber, or
cable modem.
5
Ethernet LAN 1-4—These Ethernet ports (1, 2, 3, 4) connect your TES301 to
computers and other Ethernet network devices.
6
USB—The USB port connects to a USB storage device, such as a USB hard drive
or flash disk.
7
Reset—The Reset button restores the TES301 to its original factory settings by
holding down the Reset button for 5 seconds.
Note: The reset button will restore the voice settings to the factory defaults,
which is to erase all SIP configurations.
6
4038767 Rev B
Advertisement
Table of Contents
