Table of Contents
Advertisement
Wireless-N ADSL2+ Gateway
Chapter 3: Getting to Know the Wireless-N ADSL2+
Gateway
Ports and Reset Button on Back Panel
The Gateway's ports and Reset button are located on a side panel.
Figure 3-1: Ports and Reset Button on Side Panel
The Internet port connects to the ADSL line. RJ45 and RJ11.
Internet
Ethernet (1-4)
The Ethernet ports connect to your computers and other network devices.
Reset Button
There are two ways to reset the Gateway's factory defaults. Either press the Reset Button,
for approximately five seconds, or restore the defaults from the Factory Defaults screen of
the Administration tab in the Gateway's Web-based Utility.
Power
The Power port is where you will connect the power adapter.
* Cable of RJ11 Port should use the line of 26AWG
Chapter 3: Getting to Know the Wireless-N ADSL2+ Gateway
Ports and Reset Button on Back Panel
IMPORTANT: Resetting the Gateway to factory
defaults will erase all of your settings
(including Internet connection, wireless, and
other settings) and replace them with the
factory defaults. Do not reset the Gateway if
you want to retain these settings.
6
Advertisement
Table of Contents
