Table of Contents
Advertisement
Operation
Important: The battery pack is not fully charged when it is
purchased. Before using the trimmer for the first time, place
the battery pack in the charger and charge it until the LED
display indicates the battery is charged. Make sure to read
all safety precautions. With regular use, it will need shorter
charging time. If storing for 1 month or longer, enable storage
mode on the charger. When ready to use again, charge the
battery pack until the LED display indicates the battery is
charged. Refer to (page ).
Starting the Trimmer
1. Align the tongue of the battery pack with the cavity in the
handle housing (Figure 7).
1. Trigger handle
2. Tongue
2. Grasp the trigger handle (Figure 7).
3. Push the battery pack into the handle until the latch locks
into place.
4. To start the trimmer, hold down the lock switch, then squeeze
the trigger (Figure 8).
1. Thumb wheel
2. Lock switch
Figure 7
3. Latch
Figure 8
3. Trigger
5. Slide the thumb wheel away from you to increase the motor
speed, and towards you to decrease motor speed (Figure 9).
Note: A higher motor speed is effective for trimming thicker
grass, but will decrease the battery operation time. Use a
lower motor speed to increase the operation time.
1. Thumb wheel
8
Figure 9
Advertisement
Table of Contents
