Table of Contents
Advertisement
Setup
Loose Parts
Use the chart below to verify that all parts have been shipped.
Procedure
1
2
3
4
5
1
Assembling the Trimmer
No Parts Required
Procedure
1. Slide the upper pole into the lower pole, lining up the groove
in the upper pole with the groove in the lower pole, and
secure it by tightening the screw (Figure 1).
Note: There is an audible click when the upper pole and
lower pole are in the proper position.
Description
No parts required
Guard
Phillips screw
Washer
Lock washer
Edge guard
Auxiliary handle
Latch
Brace
No parts required
Qty.
–
1
2
Mount the guard to the base of the
trimmer.
2
2
1
Install the edge guard.
1
1
Install the auxiliary handle.
1
–
Adjusting the handle height.
1. Upper pole
2. Screw
5
Use
Figure 1
3. Clamp
Advertisement
Table of Contents
