Recommended Cabling Configurations - Cisco Catalyst 3750 Hardware Installation Manual
Hide thumbs
Also See for Catalyst 3750:
- Command reference manual (1154 pages) ,
- Software configuration manual (926 pages) ,
- Hardware installation manual (231 pages)
Table of Contents
Advertisement
Planning the Stack
Figure 2-1
A
Figure 2-2
connections. This stack provides only half bandwidth and does not have redundant connections.
Figure 2-2
A
Figure 2-3
In
Figure
and does not have redundant connections. In
two stacks, and switch 1 and switch 3 are stack masters.
Figure 2-3
A
Figure 2-4
A
Recommended Cabling Configurations
This section describes the recommended cabling configurations for stacking the switches.
Catalyst 3750 Switch Hardware Installation Guide
2-10
Example of a Stack with Full Bandwidth Connections
B
C
shows an example of a stack of Catalyst 3750 switches with incomplete StackWise cabling
Example of a Stack with Half Bandwidth Connections
B
and
Figure 2-4
show examples of stacks of Catalyst 3750 switches with failover conditions.
2-3, the StackWise cable is bad in link B; therefore, this stack provides only half bandwidth
Example of a Stack with a Failover Condition
B
C
Example of a Partitioned Stack with a Failover Condition
B
Figure
2-4, link B is bad; therefore, this stack partitions into
Chapter 2
Switch Installation
OL-6336-06
Advertisement
Chapters
Table of Contents
