Table of Contents
Advertisement
1.7.3
Installing a DIMM
Unplug the power supply before adding or removing DIMMs or other
system components. Failure to do so can cause severe damage to both the
motherboard and the components.
To install a DIMM:
1.
Unlock a DIMM socket by pressing
the retaining clips outward.
2.
Align a DIMM on the socket
such that the notch on the
DIMM matches the break on
the socket.
3.
Firmly insert the DIMM into the
socket until the retaining clips snap
back in place and the DIMM is properly seated.
•
A DDR2 DIMM is keyed with a notch so that it fits in only one direction. Do
not force a DIMM into a socket to avoid damaging the DIMM.
•
The DDR2 DIMM sockets do not support DDR DIMMs. DO not install DDR
DIMMs to the DDR2 DIMM sockets.
1.7.4
Removing a DIMM
Follow these steps to remove a DIMM.
1.
Simultaneously press the retaining
clips outward to unlock the DIMM.
Support the DIMM lightly with
your fingers when pressing the
retaining clips. The DIMM
might get damaged when it flips
out with extra force.
2.
Remove the DIMM from the socket.
ASUS P5KPL-C/1600
3
1
1
DDR2 DIMM notch
2
DDR2 DIMM notch
Unlocked retaining clip
2
1
1-23
Hide quick links:
Advertisement
Table of Contents
