Siemens SINUMERIK 802D sl Programming And Operating Manual page 89
Manual machine plus turning
Hide thumbs
Also See for SINUMERIK 802D sl:
- Function manual (462 pages) ,
- Programming and operating manual (364 pages) ,
- Instruction manual (262 pages)
Table of Contents
Advertisement
Input fields
The input fields in the "Roughing B" screen form have the following meanings:
Parameter
Length
l1
Length
l2
Diameter
d1
Diameter
d2
Diameter
d3
Chamfer/radius
F1
Chamfer/radius
F2
Chamfer/radius
F3
Max. infeed depth
m1
Finishing
m2
allowance
Manual Machine Plus Turning
Programming and Operating Manual, 06/2009, 6FC5398-6CP10-1BA0
Description
Enter the length of the "step" to be produced, taking the contour start position ("Reference
z0") in the axial axis (Z axis) as the starting point.
Interpolation point position, which defines the position of the additional contour interpolation
point in the longitudinal axis (Z axis).
Outside diameter of the "step" to be machined in the radial axis (absolute position of the X
axis in the diameter).
Interpolation point diameter, which together with the "Interpolation point position l2"
parameter defines the position of the interpolation point in the radial axis (absolute position
of the X axis in the diameter), allowing beveled faces to be produced within a "step".
Inside diameter of the "step" to be machined in the radial axis (absolute position of the X
axis in the diameter).
Depending on the option selected, this value forms either a transition radius (display "RND")
or a transition chamfer (display "Chamfer CHR" or "Chamfer CHF") of less than 45
between the end face and the inside diameter of the "step". You can toggle between RND /
CHR / CHF using the toggle key. An input value of 0.0 switches this function off.
Two types of dimensioning are possible with the chamfers:
in the case of chamfer CHR, the value specifies the width of the chamfer in the direction
•
of the movement,
in the case of chamfer CHF, the value corresponds with the length of the chamfer.
•
Depending on the option selected, this value forms either a transition radius (display "RND")
or a transition chamfer (display "Chamfer CHR" or "Chamfer CHF") of less than 45
between the end face and the inside diameter of the "step". You can toggle between RND /
CHR / CHF using the toggle key. An input value of 0.0 switches this function off.
Two types of dimensioning are possible with the chamfers:
in the case of chamfer CHR, the value specifies the width of the chamfer in the direction
•
of the movement,
in the case of chamfer CHF, the value corresponds with the length of the chamfer.
•
Depending on the option selected, this value forms either a transition radius (display "RND")
or a transition chamfer (display "Chamfer CHR" or "Chamfer CHF") of less than 45
between the end face and the inside diameter of the "step". You can toggle between RND /
CHR / CHF using the toggle key. An input value of 0.0 switches this function off.
Two types of dimensioning are possible with the chamfers:
in the case of chamfer CHR, the value specifies the width of the chamfer in the direction
•
of the movement,
in the case of chamfer CHF, the value corresponds with the length of the chamfer.
•
Enter the maximum infeed depth for roughing. The internal infeed calculation ensures that
the infeed is as uniform as possible throughout the roughing operation. This entry value
represents the maximum value possible and is therefore not exceeded.
Finishing allowance in the X axis (m2x)
Finishing allowance in the Z axis (m2z)
5.4 Manual machining using cycles (functions)
Manual machining
0
0
0
89
- Quick Links:
- Control and Display Elements
Hide quick links:
Advertisement
Table of Contents
