hit counter script
Miele CS 1411 Operating And Installation Instructions
  1. Manuals
  2. Brands
  3. Miele Manuals
  4. Fryer
  5. CS 1411
  6. Operating and installation instructions
Miele CS 1411 Operating And Installation Instructions

Miele CS 1411 Operating And Installation Instructions

Deep fat fryer
Hide thumbs Also See for CS 1411:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Operating and Installation Instruction, Operation & Installation Manual
Operating and installation instructions
Deep fat fryer
CS 1411
en - GB
To avoid the risk of accidents or
damage to the appliance it is
essential to read these
instructions before it is installed
and used for the first time.
M.-Nr. 07 180 430

Advertisement

Table of Contents
loading

Related Manuals for Miele CS 1411

Summary of Contents for Miele CS 1411

  • Page 1 Operating and installation instructions Deep fat fryer CS 1411 en - GB To avoid the risk of accidents or damage to the appliance it is essential to read these instructions before it is installed and used for the first time.

  • Page 2: Table Of Contents

    Contents Guide to the appliance ..........4 Accessories supplied .
  • Page 3 Contents Installing the appliance(s) ......... . 34 General installation tips .

  • Page 4: Guide To The Appliance

    Guide to the appliance a Frying basket Display b Handle (fold-away, removable) c Hanging facility d Basket hanging support j In-operation indicator e Heating element (can be raised up) k Temperature indicator light f Drain tap l Residual heat indicator g Display h Control i Oil reservoir, capacity...

  • Page 5: Accessories Supplied

    Guide to the appliance Accessories supplied Frying basket Protects the oil reservoir after use.

  • Page 6: Warning And Safety Instructions

    Warning and Safety instructions Correct application This appliance complies with all This appliance is intended for relevant legal safety requirements. domestic use only and may only be Improper use can, however, present used as described in these instructions. a risk of both personal injury and Any other usage is at the owner's risk material damage.
  • Page 7 Warning and Safety instructions Safety with children Ensure that children cannot reach the drain tap where hot liquid could be This appliance is only intended for drained out. use by adults who have read these instructions. It is not a toy! To avoid the Packaging, e.g.
  • Page 8 H 05 VV-F The manufacturer cannot be held liable (pvc insulated), available from the Miele for the consequences of an inadequate Spare Parts Department. earthing system (e.g. electric shock).
  • Page 9 Faulty components must only be When using an electric socket near replaced by genuine Miele original the fryer, care should be taken that the parts. The manufacturer can only cable of the electrical appliance does guarantee the safety of the appliance not come into contact with the fryer.
  • Page 10 Warning and Safety instructions If frying oil does catch fire despite Do not dispose of used cooking oil this do not attempt to put out the flames down the sink. It can damage pipework with water. Stifle the fire with a suitable and cause blockages in the water fire blanket or by covering with the lid.

  • Page 11: Caring For The Environment

    Caring for the environment Disposal of the packing Disposal of your old appliance material Electrical and electronic appliances often contain materials which, if The transport and protective packing handled or disposed of incorrectly has been selected from materials which could be potentially hazardous to are environmentally friendly for human health and to the environment.

  • Page 12: Before Using For The First Time

    Before using for the first time Please stick the extra data plate for the The metal components have a appliance supplied with this protective coating which may give off documentation in the space provided in a slight smell when heated up for the the "After sales service"...

  • Page 13: Using The Fryer

    Using the fryer Fryer lid Switching on and off To remove the lid to the deep fat fryer, Do not switch on the fryer when it is press on the left or right side of the lid empty or when the heating element with your finger a.

  • Page 14: Before Frying

    Using the fryer Before frying Frying ^ Set the frying temperature required Only operate the fryer without the lid. (see chart) and wait until the temperature indicator light goes out Only use oil / fat which is suitable for for the first time. The oil has now frying in and which can be heated to reached the set temperature.
  • Page 15 Using the fryer Food (fresh) Quantity Temperature Frying time in °C in minutes Jam doughnuts 4 pieces Camembert 4 x 1/2 pieces Raw battered 400 g vegetables Chicken quarters, 2 x 250 g pieces 8-10 breaded Croquette potatoes 400 g pre-fry 2-4 fry 3-5 Apple turnovers...

  • Page 16: Frying Tips

    Using the fryer Frying tips – Use the correct ratio of food to fat. This should be between 1:10 and Handling and preparing food 1:15. For example, you need correctly is essential for maintaining between 1 and 1.5 litres of oil for good health.

  • Page 17: After Frying

    Using the fryer ^ After the oil has drained, close the After frying tap by turning it clockwise b as far Switch the fryer off and filter the oil. This as it will go. not only removes impurities which can ^ Filter the oil by pouring it through affect the taste of the food, but will help the oil last longer.

  • Page 18: Safety Cut-Out

    Safety cut-out ^ Turn the control to "0" and wait until Your fryer is fitted with a safety cut-out which automatically switches it off if: the heating element has cooled down. – the oil reservoir is not filled to at least ^ Use a pen or similar to press in pin a the lower level marker.

  • Page 19: Cleaning And Care

    Cleaning and care To avoid damaging the stainless Do not use a steam cleaning steel surfaces of your appliance, do appliance to clean this appliance. not use: The steam could reach the electrical – cleaning agents containing soda, components and cause a short alkalines, ammonia, acids or circuit.
  • Page 20 Cleaning and care Oil reservoir Stainless steel surfaces and fryer lid Stainless steel surfaces can be cleaned using a Miele E-Cloth or with a non-abrasive cleaning agent designed specifically for use on stainless steel (see "Optional accessories"). To help prevent resoiling, a...

  • Page 21: Problem Solving Guide

    ... after switching on, the appliance does not heat up. Check whether – the safety cut-out has been activated (see "Safety cut-out"). – the mains fuse has tripped. If it has, contact a qualified electrician or the Miele Service Department.

  • Page 22: Optional Accessories

    Optional accessories Miele offers a range of useful accessories as well as cleaning and conditioning products for your appliance. These can be ordered via the internet at www.miele-shop.com or from Miele (see back cover for contact details) or from your Miele dealer.
  • Page 23 Stainless steel conditioning agent 250 ml Removes water marks, flecks and finger prints. Helps keep the appliance looking good for longer. E-Cloth (microfibre cloth) Removes finger marks and light soiling. Miele descaling tablets 6 tablets For descaling the oil reservoir.

  • Page 24: Safety Instructions For Installation

    Safety instructions for installation Do not use any sealant except Fit the wall units and extractor hood where expressly instructed to do so. before fitting the appliance to avoid The seal underneath the appliance damaging the surface. provides a sufficient seal for the worktop (see "General installation tips").
  • Page 25 Safety instructions for installation Safety distance above the appliance A minimum safety distance must be maintained between the appliance and the cooker hood above it. See the cooker hood manufacturer's operating and installation instructions for details. If the manufacturer's instructions are not available for the cooker hood, a minimum safety distance of at least 760 mm must be maintained.
  • Page 26 CS 1221 CS 1234 CS 1223 50 mm CS 1112 CS 1122 Not recommended CS 1134 CS 1326 CS 1411 100 mm for CS 1012 150 mm for CS 1421 CS 1312 CS 1322 200 mm for CS 1034 250 mm for...
  • Page 27 Safety instructions for installation Safety distance when installing the appliance near a wall with additional niche cladding A minimum safety distance must be maintained between the worktop cut-out and any niche cladding to protect it from heat damage. If the niche cladding is made from a combustible material (e. g. wood) a minimum safety distance e of 50 mm must be maintained between the cut-out and the cladding.

  • Page 28: Appliance And Building-In Dimensions

    Appliance and building-in dimensions a Spring clamps b Front c Building-in depth d Building-in depth for the mains connection box with mains connection cable, L = 2,000 mm e Drain tap...

  • Page 29: Preparing The Worktop

    Preparing the worktop ^ Make the worktop cut-out for one or more appliances as applicable. Remember to maintain a minimum safety distance from the back wall, as well as from any tall unit or side wall to the right or left of the appliance(s).

  • Page 30: Installation Of Several Appliances

    Installation of several appliances When installing two or more appliances next to each other a spacer bar b must be used between each one. See "Fixing the spring clamps and spacer bars". Worktop cut-out Worktop cut-out - two appliances - three appliances To calculate the cut-out width (D) required: Add up the widths of each appliance (e.g.
  • Page 31 Installation of several appliances a Spring clamps b Spacer bars c Gap between spacer bar and worktop d Sealing strip The illustration shows a worktop cut-out with spring clamps a and spacer bars b for 3 appliances. An additional spacer bar is required for each additional appliance. The position for securing each additional spacer bar will depend on the width of appliance B (288 mm / 380 mm / 576 mm).

  • Page 32: Fixing The Spring Clamps And Spacer Bars

    Fixing the spring clamps and spacer bars Wooden worktops ^ Position the spring clamps supplied a and spacer bars b on the top edge of the cut-out in the positions marked. ^ Secure the spring clamps and spacer bars with the 3.5 x 25 mm screws supplied.
  • Page 33 Fixing the spring clamps and spacer bars Granite and marble worktops The screws are not required for granite or marble worktops. ^ Apply silcone to the side edges and the lower edges of the spring clamps a and spacer bars b. ^ Then fill gap e between the spacer ^ Position and secure the spring bars and the worktop with silicone...

  • Page 34: Installing The Appliance(S)

    Installing the appliance(s) ^ Feed the connection cable down ^ Starting at the front, position the next through the cut-out. appliance in the worktop cut-out. ^ Starting at the front, position the ^ Connect each appliance to the mains appliance in the worktop cut-out. (see "Electrical connection").

  • Page 35: General Installation Tips

    General installation tips Tiled worktop Grout lines and the hatched area underneath the appliance must be Do not use any sealant unless smooth and even. If they are not, the expressly instructed to do so. The appliance frame will not sit flush with sealing strip under the edge of the top the worktop and the sealing strip will part of the appliance provides a...

  • Page 36: Electrical Connection

    H 05 V V-F be provided for all poles. (pvc insulated), available from Miele. For extra safety it is advisable to install a suitable residual current device Installation, repairs and other work (RCD).
  • Page 37 Electrical connection Important The electrical safety of this appliance can only be guaranteed when continuity is complete between the appliance and an effective earthing system, which complies with local and national regulations. It is most important that this basic safety requirement is present and tested regularly and if there is any doubt the electrical wiring in the home should be inspected by a...

  • Page 38: After Sales Service, Data Plate

    Please note that telephone calls may be monitored and recorded to improve our service. When contacting Miele, please quote the model and serial number of your appliance which are given on the data plate. N.B. A call-out charge will be applied for service visits where the problem could have been resolved as described in these instructions.
  • Page 40 Alteration rights reserved/ 2809 M.-Nr. 07 180 430 / 03...

Table of Contents