hit counter script
Miele CS 1411 Operating And Installation Instructions
  1. Manuals
  2. Brands
  3. Miele Manuals
  4. Fryer
  5. CS 1411
  6. Operating and installation instructions
Miele CS 1411 Operating And Installation Instructions

Miele CS 1411 Operating And Installation Instructions

Deep fat fryer
Hide thumbs Also See for CS 1411:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Operation & Installation Manual
Operating and installation instructions
Deep fat fryer
To avoid the risk of accidents or damage to the appliance it is essential
to read these instructions before it is installed and used for the first time.
en-GB
M.-Nr. 07 180 430

Advertisement

Table of Contents
loading

Related Manuals for Miele CS 1411

Summary of Contents for Miele CS 1411

  • Page 1 Operating and installation instructions Deep fat fryer To avoid the risk of accidents or damage to the appliance it is essential to read these instructions before it is installed and used for the first time. en-GB M.-Nr. 07 180 430...

  • Page 2: Table Of Contents

    Contents Warning and Safety instructions................ 4 Caring for the environment ................ 13 Guide to the appliance .................. 14 Deep fat fryer......................14 Indicators....................... 15 Accessories supplied .................... 15 Using for the first time .................. 16 Cleaning the CombiSet for the first time ............... 16 Switching on the CombiSet for the first time ............
  • Page 3 Contents Installation...................... 38 Electrical connection .................. 42 After sales service, data plate, guarantee ............ 44...

  • Page 4: Warning And Safety Instructions

    They contain important notes on in- stallation, safety, use and maintenance. Miele cannot be held liable for damage caused by non-compliance with these instructions. Keep these instructions in a safe place and ensure that new users...
  • Page 5 Warning and Safety instructions Correct application  This deep fat fryer is designed for domestic use and for use in similar environments.  This deep fat fryer is not intended for outdoor use.  This deep fat fryer is intended for domestic use only to cook food. Any other use is not supported by the manufacturer and could be dangerous.
  • Page 6 Warning and Safety instructions Safety with children  Children under 8 years of age must be kept away from the deep fat fryer unless they are constantly supervised.  Children 8 years and older may only use the deep fat fryer unsu- pervised if they have been shown how to use it safely and recognise and understand the consequences of incorrect operation.
  • Page 7 Unauthorised installation, maintenance and repairs can cause considerable danger for the user. Installation, maintenance and re- pairs must only be carried out by a Miele authorised technician.  A damaged deep fat fryer can be dangerous. Check it for visible signs of damage.
  • Page 8 Miele authorised service technician. Otherwise the guarantee is invalidated.  Miele can only guarantee the safety of the appliance when genu- ine original Miele replacement parts are used. Faulty components must only be replaced by Miele spare parts.
  • Page 9 Warning and Safety instructions  Danger of electric shock. Do not use the deep fat fryer if it is faulty. Switch it off immediately, disconnect it from the mains electricity supply and contact Miele.
  • Page 10 Warning and Safety instructions Correct use  The deep fat fryer gets hot when in use and remains hot for some time after being switched off. The risk of burning is present until the residual heat indicators have gone out. ...
  • Page 11 Warning and Safety instructions  Do not pour hot fat from frying into plastic containers. These will melt at high temperatures. Only use heat-resistant containers for hot fat.  The deep fat fryer must only be used when it has been filled with oil and without the cover on it.
  • Page 12 Warning and Safety instructions Cleaning and care  Do not use a steam cleaning appliance to clean this deep fat fryer. The steam could reach electrical components and cause a short cir- cuit.

  • Page 13: Caring For The Environment

    / recycling centre for electrical and electronic ap- pliances, or contact your dealer or Miele for advice. You are also respons- ible by law for deleting any personal data that may be stored on the appli- ance being disposed of. Please ensure...

  • Page 14: Guide To The Appliance

    Guide to the appliance Deep fat fryer a Frying basket f Drain tap b Handle (folds away, removable) g Indicators c Hanging facility h Control knob d Bracket for hanging the frying basket i Oil reservoir e Heating element (can be raised up)

  • Page 15: Indicators

    Guide to the appliance Indicators Accessories supplied The accessories supplied with your ap- pliance as well as a range of optional ones are available to order from Miele (see "Optional accessories"). j In-operation indicator k Temperature indicator light Fryer lid...

  • Page 16: Using For The First Time

    Using for the first time  Please stick the extra data plate for Switching on the CombiSet for the appliance supplied with this doc- the first time umentation in the space provided in The metal components have a protect- the "After sales service, data plate, ive coating which when heated for the guarantee"...

  • Page 17: Operation

    Operation Fryer lid Switching on  Fire hazard. Do not leave the deep fat fryer unat- tended when you are using it! Do not switch the deep fat fryer on when it is empty or with the heating element raised up. ...

  • Page 18: Residual Heat Indicator

    Operation Residual heat indicator Before frying If the deep fat fryer is still hot, the resid- Do not use the fryer lid when deep ual heat indicator will light up after it fat frying. has been switched off. Only use oil and fat that has a high flash point.

  • Page 19: Frying

    Operation Frying  Set the temperature required (see chart) and wait until the temperature indicator goes out for the first time. The oil has now reached the set tem- perature.  Carefully lower the frying basket con- taining the food to be fried into the hot oil.
  • Page 20 Operation  [°C]  [min]* Food, fresh Quantity Doughnuts Qty 4 6–8 Camembert 4 x 1/2 pieces 2–3 Raw battered vegetables 400 g 7–9 Chicken quarters, breaded 2 pieces, each 8–10 250 g Croquette potatoes 400 g pre-fry 2–4 fry 3–5 Apple turnovers Qty 5 6–8 Parsley 1–2...
  • Page 21 Operation  [°C]  [min]* Food, frozen Quantity Fish fingers 300 g 4–6 Croquette potatoes 400 g pre-fry 1–2 fry 3–4 Chips 250 g 2–3 400 g 3–4 Plaice fillet, unbreaded 300 g 3–5 Squid rings, unbreaded 250 g 2–3  Temperature /  Frying times in min. * The frying times given in the chart are only a guide.

  • Page 22: Frying Tips

    Operation – Food should be as dry as possible for Frying tips frying as moisture can cause frothing. Handling and cooking food correctly Damp food should be dried using pa- is important for good health. Food per towel. Remove any excess ice should be fried until it is golden.

  • Page 23: After Frying

    Operation  Filter the oil by pouring it through kit- After frying chen paper or a metal sieve lined with Switch the fryer off and filter the oil. kitchen paper or filter paper and store This not only removes impurities which it in a closed, heat-resistant container can affect the taste of the food, but will until it is needed again.

  • Page 24: Safety Features

    Safety features  Turn the control to '0' and wait until Safety switch-off the heating element has cooled Your fryer is fitted with a safety cut-out down. which automatically switches it off if – the oil reservoir is not filled to at least the lower level marker –...

  • Page 25: Cleaning And Care

    Cleaning and care  Allow the CombiSet to cool down Danger of injury. before cleaning. The steam from a steam cleaning ap- pliance could reach electrical com-  The CombiSet and accessories ponents and cause a short circuit. should be cleaned after each use. Do not use a steam cleaner to clean the appliance.

  • Page 26: Stainless Steel Frame/Control Panel And Lid

    Cleaning and care Stainless steel frame/control Oil reservoir panel and lid  Clean the frame, the control panel and the lid with a solution of warm water and a little washing-up liquid applied with a soft sponge. You can also use a ceramic and stain- less steel cleaning agent.
  • Page 27 Cleaning and care Do not clean the frying basket in the dishwasher.

  • Page 28: Problem Solving Guide

    Danger of injury. Installation, maintenance and repairs may only be carried out by a suitably qualified and competent person. Repairs and other work by unqualified persons could be dangerous. Miele can- not be held liable for unauthorised work. Do not attempt to open the casing of the CombiSet yourself.

  • Page 29: Optional Accessories

    250 ml Miele appliances. These products can be ordered through the Miele Webshop. These can also be ordered from Miele Removes heavy soiling, limescale de- (see end of this booklet for contact de- posits and aluminium residues tails) or from your Miele dealer.

  • Page 30: Safety Instructions For Installation

    Safety instructions for installation Fit the wall units and cooker hood before fitting the CombiSet to avoid dam- aging it.  The veneer or laminate coatings of worktops (or adjacent kitchen units) must be treated with 100 °C heat-resistant adhesive which will not dissolve or distort.

  • Page 31: Safety Distances

    Safety distances Safety distance above the CombiSet A minimum safety distance must be maintained between the CombiSet and the cooker hood above it. See the cooker hood manufacturer's operating and installation instructions for details. If the manufacturer's instructions are not available for the cooker hood a min- imum safety distance of at least 760 mm must be maintained, or if any flammable objects (e.g.
  • Page 32 CS 1223 CS 1222 Recommended 50 mm CS 1112 CS 1122 CS 1134 CS 1326 CS 1327 CS 1411 100 mm CS 1012 / CS 1012-1 150 mm CS 1421 CS 1312 Not recommended CS 1322 200 mm CS 1034 / CS 1034-1...
  • Page 33 Safety distances Safety distance when installing the appliance near a wall with additional niche cladding A minimum safety distance must be maintained between the worktop cut-out and any niche cladding to protect it from heat damage. If the niche cladding is made from a combustible material (e.g. wood) a minimum safety distance ...

  • Page 34: Installation Notes

    Installation notes Seal between the CombiSet Tiled worktop and the worktop Grout lines  and the hatched area un- derneath the CombiSet frame must be smooth and even. If they are not the Do not use sealant between the CombiSet will not sit flush with the CombiSet and the worktop.

  • Page 35: Building-In Dimensions

    Building-in dimensions a Spring clamps b Front c Casing depth d Casing depth including mains connection box with mains connection cable, L = 2000 mm Drain tap...

  • Page 36: Building-In Several Combisets

    Building-in several CombiSets Example: 3 CombiSets a Spring clamps b Spacer bars c Gaps between spacer bars and worktop d Cover strips e CombiSet width minus 8 mm f CombiSet width g CombiSet width minus 8 mm h Worktop cut-out...
  • Page 37 Building-in several CombiSets Calculating the worktop cut-out The frames of the CombiSets overlap the worktop at the outside right and left by 8 mm on each side.  Add up the widths of the CombiSets and subtract 16 mm from this figure. Example: 288 mm + 288 mm + 380 mm = 956 mm - 16 mm = 940 mm The CombiSets are 288 mm, 380 mm or 576 mm wide depending on model (see...

  • Page 38: Installation

    Installation Preparing the worktop  Make the worktop cut-out as shown in "Building-in dimensions" or as cal- culated (see Building-in several CombiSets). Observe the safety dis- tances (see "Safety distances"). Wooden worktops  Seal the cut surfaces with a suitable sealant to avoid swelling caused by moisture.
  • Page 39 Installation Natural stone worktops You will need heavy duty double-side tape (not supplied) to secure the spring clamps and spacer bars.  Apply silicone to the side and lower edges of the spring clamps  and the spacer bars .  Then fill gap  between spacer bar ...
  • Page 40 Installation Building in several CombiSets Installing the CombiSet  Push the built-in CombiSet to the  Feed the mains connection cable side until the holes in the spacer bar down through the cut-out. can be seen.  Starting at the front, position the CombiSet in the worktop cut-out.
  • Page 41 Installation Connecting the CombiSet  Connect the CombiSet(s) to the mains.  Check that each CombiSet works. Removing the CombiSet If the CombiSet cannot be accessed from below, you will need a special tool to remove it.  If the CombiSet can be accessed from below, push it out from below.

  • Page 42: Electrical Connection

    Residual current device  Danger of injury. For extra safety, it is advisable to pro- Miele cannot be held liable for unau- tect the CombiSet with a suitable resid- thorised installation, maintenance ual current device (RCD) with a trip and repair work as this can be dan- range of 30 mA.
  • Page 43 If the mains cable needs to be replaced it must be replaced with a special con- Safety fuses nection cable, type H 05 VV-F (PVC-in- sulated), available from Miele.  Completely remove fuses The connection data is quoted on the Automatic circuit breakers data plate.

  • Page 44: After Sales Service, Data Plate, Guarantee

    N.B. A call-out charge will be applied to service visits where the problem could have been resolved as described in these instructions. When contacting your Dealer or Miele, please quote the model and serial number of your appliance. Data plate Space in which to stick the extra data plate supplied with the appliance.
  • Page 47 Tel: +971 4 3044 999 Tel: (01) 461 07 10, Fax: (01) 461 07 97 Fax: +971 4 3418 852 E-Mail: info@miele.ie, Internet: www.miele.ie 800-MIELE (64353) Manufacturer: Miele & Cie. KG E-Mail: info@miele.ae Carl-Miele-Straße 29, 33332 Gütersloh, Germany Internet: www.miele.ae...
  • Page 48 CS 1411  en-GB M.-Nr. 07 180 430 / 07...

Table of Contents