Setting Of Country/Language (Function Code 52) (User-Accessible) - Brother DCP375CW Service Manual
Injet dcp/mfc
Hide thumbs
Also See for DCP375CW:
- Gu (200 pages) ,
- Guía del usuario (173 pages) ,
- User manual (118 pages)
Table of Contents
Advertisement
9.4.12 Setting of Country/Language (Function code 52) (User-accessible)
Function
Machines have been customized for their destination countries with the corresponding
EEPROM customizing codes (see
customizing codes are shared by two or more destination countries, so the machines customized
by these codes require further specifying individual destination countries or languages.
Usually, the user specifies the destination country or language on the LCD screen called up
automatically when turning the machine on first after purchase. In the same way, the service
personnel also specifies it if the main PCB is replaced; however, if he/she skips the
specification process at that timing, be sure to perform the procedure given below.
EEPROM Customizing Code
Operating Procedure
(1) Press the 5 and 2 keys in this order. For models without numerical keypad, enter 5 and 2 in
this order using the
The "Set Country / Press OK" appears on the LCD.
(2) Press the OK key.
The country name appears on the LCD.
(3) Use the
the desired country or language.
NOTE: For selectable countries and languages, refer to the tables shown above.
(4) Press the OK key.
The country name and "1. Yes 2. No" appear on the LCD.
(5) Press the 1 key. For models without numerical keypad, enter 1 using the
keys.
The machine shows "Accepted" on the LCD, saves the new setting, and returns to the
standby state.
**53
**55
**56
**57
**65
,
and OK keys.
and
keys (Scan and Copy keys for models without
Section
9.4.24, Function code 74). However, some
Germany and Austria
France, Belgium, and Netherlands
Australia and New Zealand
Norway, Sweden, Finland, and Denmark
Spain, Portugal, and Andorra
9-28
Countries
and
keys) to display
,
and OK
Confidential
- Quick Links:
- Service Manual
Hide quick links:
Advertisement
Chapters
Table of Contents
Troubleshooting
