Setting Of Country/Language (Function Code 52) (User-Accessible) - Brother DCPJ525W Service Manual
Hide thumbs
Also See for DCPJ525W:
- Basic user's manual (100 pages) ,
- Quick setup manual (32 pages) ,
- User manual (85 pages)
Table of Contents
Advertisement
1.4.13 Setting of Country/Language (Function code 52) (User-accessible)
Function
Machines have been customized for their destination countries with the corresponding
EEPROM customizing codes (see
customizing codes are shared by two or more destination countries as listed below, so the
machines customized by these codes require further specifying individual destination countries
or languages.
Usually, the user specifies the destination country or language on the LCD screen called up
automatically when turning the machine on first after purchase. In the same way, the service
personnel also specifies it if the main PCB is replaced; however, if he/she does not specify the
destination country or language at that timing, be sure to perform the procedure given below.
EEPROM Customizing Code
Operating Procedure
(1) Press the 5 and 2 keys in this order in the initial stage of the maintenance mode.
The "Set Country" or "Select Language" appears on the LCD.
Note: If an EEPROM customizing code other than those listed above has been specified,
the machine automatically returns to the initial stage of the maintenance mode without
displaying the country/language menu.
Note: The messages shown during this procedure are in US English.
(2) Use the
Note: For selectable countries and languages, refer to the tables shown above.
(3) Press the OK key.
The "*****? 1.Yes 2.No." appears on the LCD.
(4) Press the 1 key.
The machine displays "ACCEPTED" on the LCD, saves the new setting, and returns to the
initial stage of the maintenance mode. This completes the setting procedure.
53
Germany and Austria
**
54
Czech, Hungary, Poland, Rumania, and Bulgaria
**
55
France, Belgium, and Netherlands
**
56
Australia and New Zealand
**
57
Norway, Sweden, Finland, and Denmark
**
65
Spain, Portugal, and Andorra
**
and
keys to display the desired country or language.
Section
1.4.26, Function code 74). However, some
5-26
Countries
***** : Selected country
Confidential
- Quick Links:
- Service Manual
Hide quick links:
Advertisement
Chapters
Table of Contents
Troubleshooting
