Rf Profiles - Cisco 9971 Deployment Manual

Unified ip phone wireless lan deployment guide

Hide thumbs Also See for 9971:

Table of Contents

On the APs tab, select the desired access points then select Add APs.

Those access points will then reboot.

RF Profiles

RF Profiles can be created to specify which frequency bands, data rates, RRM settings, etc. a group of access points should use.

RF Profiles are applied to an AP group once created. See the AP Groups section for more info on AP Group configuration.

When creating an RF Profile, the RF Profile Name and Radio Policy must be defined.

Select 802.11a or 802.11b/g for the Radio Policy.

On the 802.11 tab, configure the data rates as desired.

Is recommended to enable 12 Mbps as Mandatory and 18-54 Mbps as Supported; however some environments may require 6

Mbps to be enabled as a mandatory (basic) rate.

Cisco Unified IP Phone 9971 Wireless LAN Deployment Guide

Table of Contents