Ssid / Wlan Settings - Cisco 9971 Deployment Manual

Unified ip phone wireless lan deployment guide

Hide thumbs Also See for 9971:

Administration manual (352 pages)

Deployment manual (74 pages)

User manual (42 pages)

Table Of Contents

100

101

102

103

104

Table of Contents

Set the WMM Policy to Required

•

Ensure Session Timeout is enabled and configured correctly

•

Ensure Aironet IE is Enabled

•

Set DTPC Support to Enabled

•

Disable P2P (Peer to Peer) Blocking Action / Public Secure Packet Forwarding (PSPF)

•

Ensure Client Exclusion is configured correctly

•

Disable DHCP Address Assignment Required

•

Set MFP Client Protection to Optional or Disabled

•

Set the DTIM Period to 2

•

Set Client Load Balancing to Disabled

•

Set Client Band Select to Disabled

•

Set IGMP Snooping to Enabled

•

Enable Symmetric Mobile Tunneling Mode if Layer 3 mobility is utilized

•

Enable Short Preamble if using 2.4 GHz

•

Enable ClientLink if utilizing Cisco 802.11n Access Points

•

Configure the Data Rates as necessary

•

Enable CCX Location Measurement

•

Configure Auto RF as necessary

•

Set Admission Control Mandatory to Enabled for Voice

•

Set Load Based CAC to Enabled for Voice

•

Enable Traffic Stream Metrics for Voice

•

Set Admission Control Mandatory to Disabled for Video

•

Set EDCA Profile to Voice Optimized or Voice and Video Optimized

•

Set Enable Low Latency MAC to Disabled

•

Ensure that Power Constraint is Disabled

•

Enable Channel Announcement and Channel Quiet Mode

•

Enable CleanAir if utilizing Cisco Access Points with CleanAir technology

•

Configure Multicast Direct Feature as necessary

•

Set the 802.1p tag to 5 for the Platinum QoS profile

•

Note: If clients from other regions are present and will attempt to associate with the wireless LAN, then ensure that World

Mode (802.11d) is enabled.

When using 802.1x authentication, it is recommended to implement CCKM to offer fast secure roaming.