Cisco 9971 Deployment Manual page 47
Unified ip phone wireless lan deployment guide
Hide thumbs
Also See for 9971:
- Administration manual (352 pages) ,
- Deployment manual (74 pages) ,
- User manual (42 pages)
Table of Contents
Advertisement
SDIO
Bluetooth
Wifi
Bluetooth Profiles
Settings Access
Gratuitous ARP
PC Voice VLAN Access
Web Access
Show All Calls on Primary Line
Days Display Not Active
Display On Time
Display On Duration
Cisco Unified IP Phone 9971 Wireless LAN Deployment Guide
Indicates whether the SDIO device on the phone is enabled or disabled.
Indicates whether the Bluetooth device on the phone is enabled or disabled.
Indicates whether the Wifi device on the phone is enabled or disabled.
Indicates which Bluetooth profiles on the phone are enabled or disabled.
Indicates whether the Settings button on the phone is functional. When Settings
Access is enabled, you can change the phone network configuration, ring type,
and volume on the phone. When Settings Access is disabled, the Settings button
is completely disabled; no options appear when you press the button. Also, you
cannot adjust the ringer volume or save any volume settings. When Settings
Access is restricted, you can only access User Preferences and volume settings.
By default, Settings Access is enabled.
Indicates whether the phone will learn MAC addresses from Gratuitous ARP
responses. Disabling the phones ability to accept Gratuitous ARP will prevent
applications, which use this mechanism for monitoring and recording of voice
streams from working. If monitoring capability is not desired, change this setting
to Disabled.
Indicates whether the phone will allow a device attached to the PC port to access
the Voice VLAN. Disabling Voice VLAN Access will prevent the attached PC
from sending and receiving data on the Voice VLAN. It will also prevent the PC
from receiving data sent and received by the phone. Set this setting to Enabled if
an application is being run on the PC that requires monitoring of the phones
traffic. These could include monitoring and recording applications and use of
network monitoring software for analysis purposes.
This parameter indicates whether the phone will accept connections from a web
browser or other HTTP client. Disabling the web server functionality of the
phone will block access to the phones internal web pages. These pages provide
statistics and configuration information. Features, such as QRT ( Quality Report
Tool ), will not function properly without access to the phones web pages. This
setting will also affect any serviceability application such as CiscoWorks 2000
that relies on web access.
When enabled, indicates that all calls presented to this device will be shown when
the Primary line is selected.
This field allows the user to specify the days that the backlight is to remain off by
default. Typically this would be Saturday and Sunday for US corporate
customers. Saturday and Sunday should be the default. The list contains all of the
days of the week. To turn off backlight on Saturday and Sunday the User would
hold down Control and select Saturday and Sunday.
This field indicates the time of day the display is to automatically turn itself on
for days listed in the off schedule. The value should be in a 24 hour format.
Where 0:00 is the beginning of the day and 23:59 is the end of the day. Leaving
this field blank will activate the display at the default time of the day (e.g. -
"7:30"). To set the display to turn on at 7:00AM the user would enter "07:00"
without the quotes. If they wanted the display to turn on at 2:00PM they would
enter "14:00" without the quotes.
This field indicates the amount of time the display is to be active for when it is
turned on by the programmed schedule. Leaving this field blank will make the
phone use a pre-determined default value of "10:30". Maximum value is 24
47
Advertisement
Table of Contents
