Defining 802.1X Properties - Cisco SF200-24 Administration Manual
Small business 200 series smart switch
Hide thumbs
Also See for SF200-24:
- Quick start manual (57 pages) ,
- Administration manual (337 pages) ,
- Datasheet (11 pages)
Table of Contents
Advertisement
Configuring Security
Configuring 802. 1 X
STEP 1
STEP 2
Cisco Small Business 200 1. 1 Series Smart Switch Administration Guide
•
Define 802. 1 X settings for each port by using the Edit Port Authentication
page.
Note the following:
•
On this page, DVA can be activated on a port by selecting the RADIUS
VLAN Assignment field.
•
You can select the Guest VLAN field to have untagged incoming frames go
to the guest VLAN.
•
Define host authentication parameters for each port using the Port
Authentication page.
•
View 802. 1 X authentication history using the Authenticated Hosts page.
Defining 802.1X Properties
The 802. 1 X Properties page is used to globally enable 802. 1 X and define how
ports will be authenticated. For 802. 1 X to function, it must be activated both
globally and individually on each port.
To define port-based authentication:
Click Security > 802.1X > Properties. The 802. 1 X Properties page displays.
Enter the parameters.
•
Port-Based Authentication—Enable or disable port-based, 802. 1 X
authentication.
•
Authentication Method—Select the user authentication methods. The
options are:
-
RADIUS, None—Perform port authentication first by using the RADIUS
server. If no response is received from RADIUS (for example, if the server
is down), then no authentication is performed, and the session is
permitted
.
-
RADIUS—Authenticate the user on the RADIUS server. If no
authentication is performed, the session is not permitted.
-
None—Do not authenticate the user. Permit the session.
17
247
Hide quick links:
Advertisement
Table of Contents
