Cisco SF200-24 Administration Manual page 162
Small business 200 series smart switch
Hide thumbs
Also See for SF200-24:
- Quick start manual (57 pages) ,
- Administration manual (337 pages) ,
- Datasheet (11 pages)
Table of Contents
Advertisement
Managing Power-over-Ethernet Devices
Configuring PoE Properties
STEP 1
STEP 2
STEP 3
Cisco Small Business 200 1. 1 Series Smart Switch Administration Guide
Output power is disabled during power-on reboot, initialization, and system
configuration to ensure that PDs are not damaged.
To configure PoE on the switch and monitor current power usage:
Click Port Management > PoE > Properties. The
Enter the values for the following fields:
•
Power Mode—Select one of the following options:
Port Limit
-
—The maximum power limit per each port is configured by the
user.
Class Limit
-
class of the device, which results from the Classification stage.
•
Traps—Enable or disable a SYSLOG trap.
•
Power Trap Threshold—Enter the usage threshold that is a percentage of
the power limit. An alarm is initiated if the power exceeds this value.
The following counters are displayed:
•
Nominal Power—The total amount of power the switch can supply to all the
connected PDs.
•
Consumed Power—Amount of power currently being consumed by the PoE
ports.
•
Available Power—Nominal power - the amount of consumed power.
Click Apply to save the PoE properties.
—The maximum power limit per port is determined by the
PoE Properties
page opens.
11
154
Hide quick links:
Advertisement
Table of Contents
