Smartport Type Settings - Cisco SF200-24 Administration Manual
Small business 200 series smart switch
Hide thumbs
Also See for SF200-24:
- Quick start manual (57 pages) ,
- Administration manual (337 pages) ,
- Datasheet (11 pages)
Table of Contents
Advertisement
Smartports
Web GUI
STEP 3
NOTE
STEP 1
STEP 2
Cisco Small Business 200 1. 1 Series Smart Switch Administration Guide
•
Auto Smartport Device Detection Method—Select whether incoming
CDP, LLDP, or both types of packets are used to detect the Smartport type
of the attaching device(s). At least one must be checked in order for Auto
Smartport to identify devices.
•
Operational CDP Status—Displays the operational status of CDP. Enable
CDP if Auto Smartport is to detect the Smartport type based on CDP
advertisement.
•
Operational LLDP Status—Displays the operational status of LLDP. Enable
LLDP if Auto Smartport is to detect the Smartport type based on LLDP/
LLDP-MED advertisement.
•
Auto Smartport Device Detection—Select each type of device for which
Auto Smartport can assign Smartport types to interfaces. If unchecked, Auto
Smartport will not assign that Smartport type to any interface.
Click Apply. This sets the global Smartport parameters on the switch.
Smartport Type Settings
Use the Smartport Type Settings page to edit the Smartport Type settings and
view the Macro Source.
By default, each Smartport type is associated with a pair of built-in Smartport
macros. See the
Smartport Types
anti-macro. Built-in or user-defined macros can have parameters. The built-in
macros have up to three parameters.
Editing these parameters for the Smartport types applied by Auto Smartport from
Smartport Type Settings
the
parameters. These defaults will be used by Auto Smartport.
Changes to Auto Smartport types will cause the new settings to be applied to
interfaces which have already been assigned that type by Auto Smartport. In this
case, binding an invalid macro or setting an invalid default parameter value will
cause all ports of this Smartport type to become unknown.
Click Smartport > Smartport Type Settings. The Smartport Type Settings page
opens.
To view the Smartport macro associated with a Smartport type, select a
Smartport type and click View Macro Source.
page for further information on macro versus
page configures the default values for these
9
117
Hide quick links:
Advertisement
Table of Contents
