hit counter script
Download Print this page
Cisco TelePresence MX300 G2 Installing

Cisco TelePresence MX300 G2 Installing

Hide thumbs Also See for TelePresence MX300 G2:

Advertisement

Installing Cisco TelePresence MX300 G2 - Floor Stand
78-100143-01 | OCTOBER 2013 | © 2013 Cisco Systems, Inc. All rights reserved.
This installation guide covers MX300 G2 with a floor stand.
Dimensions
Height: 1521 mm / 59.9 in.
Width: 1278 mm / 50.4 in.
Depth: 671 mm / 26.5 in.
Weight total: 53 kg / 117 lb
Weight monitor: 35 kg / 78 lb
Manpower
Two people working together are required to mount the
monitor to the base module.
Room setup
Explore the Meeting Room – London scenario on the Cisco Project
Workplace, http://www.cisco.com/go/projectworkplace, to find
inspiration and guidelines when preparing your office or meeting
room for video conferencing.
Documentation
The user documentation for this product, including compliance
and safety information, is available on the Cisco web site,
http://www.cisco.com/go/mx-docs

Advertisement

loading

Summary of Contents for Cisco TelePresence MX300 G2

  • Page 1 Documentation The user documentation for this product, including compliance and safety information, is available on the Cisco web site, http://www.cisco.com/go/mx-docs 78-100143-01 | OCTOBER 2013 | © 2013 Cisco Systems, Inc. All rights reserved.
  • Page 2 • Screws for mounting the monitor • Gloves Touch controller • Floor stand base • Column • Base covers • Screws for mounting the base • Screwdriver 78-100143-01 | OCTOBER 2013 | © 2013 Cisco Systems, Inc. All rights reserved.
  • Page 3 Installing Cisco TelePresence MX300 G2 - Floor Stand Mounting the floor stand 4 × M6x16 78-100143-01 | OCTOBER 2013 | © 2013 Cisco Systems, Inc. All rights reserved.
  • Page 4: Mounting The Monitor

    You need it in step 4. Front The monitor may be tilting slightly forward. If you gently pull it to a vertical position, the screws enter more easily. 78-100143-01 | OCTOBER 2013 | © 2013 Cisco Systems, Inc. All rights reserved.
  • Page 5: Connecting The Cables

    Use the cable that is labeled The wall socket outlet must with for the Touch controller; be easily accessible after use the cable that is labeled installation. with for the LAN 78-100143-01 | OCTOBER 2013 | © 2013 Cisco Systems, Inc. All rights reserved.
  • Page 6: Starting Up The System

    Lead the cables around the cable slot several times if the cables are longer than you need. 78-100143-01 | OCTOBER 2013 | © 2013 Cisco Systems, Inc. All rights reserved.
  • Page 7 On our web site you will find an overview of the worldwide Cisco contacts. Go to: http://www.cisco.com/web/siteassets/contacts Corporate Headquarters Cisco Systems, Inc. 170 West Tasman Dr. San Jose, CA 95134 USA 78-100143-01 | OCTOBER 2013 | © 2013 Cisco Systems, Inc. All rights reserved.