Toshiba Satellite U500 Maintenance Manual page 62
Hide thumbs
Also See for Satellite U500:
- User manual (224 pages) ,
- Manual del usuario (253 pages) ,
- Resource manual (64 pages)
Table of Contents
Advertisement
2 Troubleshooting Procedures
Procedure 3
Format Check
The computer's HDD/SSD is formatted using the low level format program and the MS-DOS
FORMAT program. To format the HDD/SSD, start with Check 1 below and perform the
other steps as required.
Format the HDD/SSD and transfer system files using FORMAT C:/S/U. If the
Check 1
following message appears on the display, the HDD/SSD is formatted.
Format complete
If an error message appears on the display, refer to the Toshiba MS-DOS Manual
for more information and perform Check 2.
Check 2
Using the Diagnostics Disk, format the HDD/SSD with a low level format option.
Refer to Chapter 3, Tests and Diagnostics for more information about the
diagnostic program.
If the following message appears on the display, the HDD/SSD low level format
is complete. Partition and format the HDD/SSD using the MS-DOS FORMAT
command.
Format complete
If you cannot format the HDD/SSD using the Tests and Diagnostic program, go to
Procedure 4.
2-26
[CONFIDENTIAL] Satellite M500D/M505D/M507D Maintenance Manual
Hide quick links:
Advertisement
Chapters
Table of Contents
Troubleshooting
