Toshiba Satellite U500 Maintenance Manual page 52
Hide thumbs
Also See for Satellite U500:
- User manual (224 pages) ,
- Manual del usuario (253 pages) ,
- Resource manual (64 pages)
Table of Contents
Advertisement
2 Troubleshooting Procedures
Procedure 3
Connection Check
The power supply wiring diagram is shown below:
Any of the connectors may be disconnected. Perform Check 1.
Check 1
Disconnect the AC power cord from the wall outlet. Check the power cable for
breaks. If the power cord is damaged, connect a new AC power cord. If there is
no damage, go to Check 2.
Check 2
Make sure the AC adaptor cord and AC power cord are firmly plugged into the
DC-IN jack socket and AC adaptor inlet/wall outlet, respectively. If these cables
are connected correctly, go to Check 3.
Check 3
Make sure the DC IN jack is firmly connected to the connector J7701 on the main
board.
• If the DC IN jack is not firmly connected, go to Procedure 5.
• If it is connected, go to Check 4.
Check 4
Use a multimeter to make sure the AC adaptor output voltage is close to 19 V. If
the output is several percent lower than 19 V, go to Check 5. If the output is close
to 19 V, go to Check 6.
Check 5
Connect a new AC adaptor or AC power cord.
• If the DC IN icon does not light, go to Procedure 5.
• If the battery icon does not light, go to Check 6.
Check 6
Make sure the battery pack is installed in the computer correctly. If the battery is
properly installed and the battery icon still does not light, go to Procedure 4.
2-16
[CONFIDENTIAL] Satellite M500D/M505D/M507D Maintenance Manual
Hide quick links:
Advertisement
Chapters
Table of Contents
Troubleshooting
