Figure 4-32 Removing the main PCB.
Installing the Main PCB
To install the Main PCB, follow the steps below and refer to Figures 4-31 and 4-32.
1. Install the main PCB and mental bracket on the bottom case, and secure the main
PCB and mental bracket to the bottom case using the following screws.
• M2×5L
• M2×2.5L
2. Connect the speaker cable, DC-IN Port cable, Coaxial cable and Camera cable with
the main PCB and paste six pieces of tape to secure the speaker cable. Secure the
screw as the following that fixing the coaxial cable.
• M2×2L
Satellite/Satellite Pro U500/U500D, PORTEGE M900/M900D
FLAT HEAD screw
FLAT HEAD screw
FLAT HEAD screw
4 Replacement Procedures
×2
×2
×1
Maintenance Manual 4-55